The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

Power off and on the programmable controller again after the communication setting is changed.

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer.

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be che

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-

The operation is not guaranteed. Please select the extension blocks and units from FX2N series.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

61-70 of Total 126

prev 7 / 13page next

Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
Reflecting the changes in the communication setting

Power off and on the programmable controller again after the communication setting is changed. More Details >>
- No：25006
- Release Date：2019/04/23 11:11
Battery replacement timing

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25). The life of the battery changes wit... More Details >>
- No：22262
- Release Date：2018/08/30 13:48
1 ms timer (FX3G/3GC series)

Yes, there is. T256 to T319 can be used for the1 ms timer, and T246 to T249 can be used for the 1 ms retentive timer. More Details >>
- No：24680
- Release Date：2019/02/22 11:39
- Update：2019/02/22 14:03
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
Supported versions of the FX3G/FX3GC series main units for the CC-Link parameter settings of GX Works2

Ver2.00 or later is applicable. (GX Works2 with Ver. 1.87R or later is applicable.) The version of main units can be checked with the last three digits of t... More Details >>
- No：24922
- Release Date：2019/04/17 11:41
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
Adding two channels of the RS-232C port in the FX3G series

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
- No：24926
- Release Date：2019/04/17 11:42
Extension blocks and units that can be used in the FX3U series

The operation is not guaranteed. Please select the extension blocks and units from FX2N series. More Details >>
- No：24935
- Release Date：2019/04/18 14:24

61-70 of Total 126

Inquiries

page top