The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please ref

A battery is used for backing up program memory and latched device data and maintaining clock operation in the event of

An FX3G-CNV-ADP is required. * When the FX3U-ENET-ADP is used with other special adapters, connect the FX3U-ENET-ADP a

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of t

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a pers

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

The output contact is activated according to the change of the current value register along with the counting input. The

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

61-70 of Total 126

prev 7 / 13page next

FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
How to set battery-less operation(FX3U/FX3UC)

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please refer to the following manual for furt... More Details >>
- No：22277
- Release Date：2018/08/30 13:48
- Update：2019/02/19 08:47
Programmable controllers with no battery (MELSEC-F)

A battery is used for backing up program memory and latched device data and maintaining clock operation in the event of a power failure. The FX3S/FX3G/FX3G... More Details >>
- No：22259
- Release Date：2018/08/30 13:48
Connection of the FX3G series and the FX3U-ENET-ADP

AnFX3G-CNV-ADP is required. 　 * When the FX3U-ENET-ADP is used with other special adapters, connect the FX3U-ENET-ADP at the last stage (left end). More Details >>
- No：24951
- Release Date：2019/04/18 14:27
Operation processing time of the programmable controller

The constant operation processing time can be achieved by using constant scan mode. Refer to the programming manual of the programmable controller used. More Details >>
- No：24997
- Release Date：2019/04/23 10:38
Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
Remote maintenance

Remote maintenance can be performed by writing a program to a memory cassette and sending the program or by using a personal computer (GX Developer). With a ... More Details >>
- No：24998
- Release Date：2019/04/23 10:38
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43

61-70 of Total 126

Inquiries

page top