When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications betwe

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

The longest gratis warranty term after manufacturing shall be eighteen (18) months. For details, refer to the gratis war

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25)

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, i

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

71-80 of Total 126

prev 8 / 13page next

Communications with a personal computer after the communication parameters for the RS-232C communication equipment are set

When a personal computer (GX Works2) is connected to the RS-232C port of a programmable controller, communications between the personal computer and the prog... More Details >>
- No：24782
- Release Date：2019/02/27 16:10
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
Gratis warranty term of the FX programmable controllers

The longest gratis warranty term after manufacturing shall be eighteen (18) months. For details, refer to the gratis warranty term explained in the applicabl... More Details >>
- No：24928
- Release Date：2019/04/17 11:42
Battery replacement timing

Periodic replacement is recommended. For example, standard life of FX3U-32BL is 5 years (at ambient temperature of 25). The life of the battery changes wit... More Details >>
- No：22262
- Release Date：2018/08/30 13:48
Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
Accessories of the FX3UC-16MR/DS-T and the FX3UC-16MR/D-T

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "FX2NC-100BPCB" power supply cable for... More Details >>
- No：25005
- Release Date：2019/04/23 11:11
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31

71-80 of Total 126

Inquiries

page top