When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

Connect the "0V (-)" terminal of the external 24V DC power supply to the "COM" terminal (- side of the built-in power su

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spe

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC pow

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your

The output contact is activated according to the change of the current value register along with the counting input. The

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

81-90 of Total 126

prev 9 / 13page next

Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
How to wire the 24V DC power supply for sensors

Connect the "0V (-)" terminal of the external 24V DC power supply to the "COM" terminal (- side of the built-in power supply), one of the input terminals of ... More Details >>
- No：22281
- Release Date：2018/08/30 13:48
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
24+ terminal connection of an extension block

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC power supply type, connect the 24+ termi... More Details >>
- No：24786
- Release Date：2019/02/28 09:06
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
Compliance of the FX programmable controllers with the EU RoHS Directive

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your local Mitsubishi Electric representa... More Details >>
- No：24888
- Release Date：2019/04/15 08:07
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43

81-90 of Total 126

Inquiries

page top