Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, in

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC powe

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

81-90 of Total 126

prev 9 / 13page next

Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31
Connection of expansion boards and a memory cassette to the FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a memory cassette can b... More Details >>
- No：24952
- Release Date：2019/04/18 14:27
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
24+ terminal connection of an extension block

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC power supply type, connect the 24+ termi... More Details >>
- No：24786
- Release Date：2019/02/28 09:06
Setting day of the week when using the TWR instruction (FX3 series)

Day of week is automatically set. When data written to the data register for storing day-of-the-week data is within the setting range (K = 0 to 6), the day ... More Details >>
- No：24777
- Release Date：2019/02/27 15:57
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22

81-90 of Total 126

Inquiries

page top