The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

The output contact is activated according to the change of the current value register along with the counting input. The

Since they are octal, the number after X7 is X10 and after X77 is X100.

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. * When the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

81-90 of Total 126

prev 9 / 13page next

Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
Overwriting a current value with the high-speed counter comparison instruction

The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
- No：24931
- Release Date：2019/04/17 11:43
Input numbers of the FX programmable controllers

Since they are octal, the number after X7 is X10 and after X77 is X100. More Details >>
- No：25000
- Release Date：2019/04/23 10:39
Instruction execution complete flag

When a flag contact is not programmed directly under the instruction to be checked, the flag may be turned off depending on the execution status of another i... More Details >>
- No：24988
- Release Date：2019/04/23 07:22
Types of the ports built in the FX programmable controllers

There are RS422 × 1ch for the FX1S/FX1N/FX1NC/FX2N/FX2NC/FX3U/FX3UC series and RS422 × 1ch and USB × 1ch for the FX3G/FX3GC series. More Details >>
- No：24971
- Release Date：2019/04/23 07:19
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3U series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3U series. *The FX3U-ENET-ADP is a communication special adapter and o... More Details >>
- No：24912
- Release Date：2019/04/17 11:39
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
Connection of the FX3GC series and FX3U-ENET-ADP

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. 　 * When the FX3U-ENET-ADP is used with other spe... More Details >>
- No：24976
- Release Date：2019/04/23 07:20

81-90 of Total 126

Inquiries

page top