If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st po

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable contr

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-

Yes, they are independent common terminals.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Main Unit

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Main Unit ]

1-10 of Total 126

prev 1 / 13page next

Connecting special adapters to the FX3G series

An FX3G-CNV-ADP is required. More Details >>
- No：24977
- Release Date：2019/04/23 07:20
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
Using a fixed latched (battery backed) type device as a general type device

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>
- No：24925
- Release Date：2019/04/17 11:42
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
Connection of expansion boards and a memory cassette to the FX3G series main unit

They can be used together. * 14/24-point type FX3G series main unit ･ An expansion board can be connected to BD1 (1st position) and a memory cassette can b... More Details >>
- No：24952
- Release Date：2019/04/18 14:27
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
Transferring/editing programs in the previous FX programmable controllers using GX Works2

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable controllers. More Details >>
- No：25012
- Release Date：2019/04/23 11:16
Adding two channels of the RS-232C port in the FX3G series

Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
- No：24926
- Release Date：2019/04/17 11:42
Terminal layout on the output side of the FX3U-16MR/ES

Yes, they are independent common terminals. More Details >>
- No：24955
- Release Date：2019/04/18 14:23

1-10 of Total 126

Inquiries

page top