Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be selected.

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum lo

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙T

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the

Yes, they have the same terminal layout.

The external and mounting dimensions of the FX2N-1PG and the FX3U-1PG are identical. However, the electrical specificati

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected.

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (posi

Since the JOG speed is the positioning parameter, turn off and on the positioning parameter enable command (X-axis: BFM#

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Positioning Control

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Positioning Control ]

1-10 of Total 20

prev 1 / 2page next

Pulse output system of the FX3U-1PG pulse output block

Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be selected. More Details >>
- No：24957
- Release Date：2019/04/18 14:28
Pulse output type of the FX3U-1PG pulse output block

It is transistor output. Transistor output specifications are as follows. ･ Rated load voltage 5 to 24 V DC ･ Maximum load current 20 mA or lower More Details >>
- No：24972
- Release Date：2019/04/23 07:19
Starting time of the FX3U-1PG

It takes 1 ms or less in a unit of the motor system and 2 ms or less in a unit of the machine system. * Motor system∙∙∙The pulse number is used as the stand... More Details >>
- No：24943
- Release Date：2019/04/18 14:25
Target address change during the positioning operation in the FX3U-1PG

Yes, it is possible. Set a new value for the target address to the target address change value (BFM#54, #53) during the positioning operation. 　　 * The targ... More Details >>
- No：24986
- Release Date：2019/04/23 07:22
Terminal layout of the FX3U-1PG and FX2N-1PG pulse output blocks

Yes, they have the same terminal layout. More Details >>
- No：24900
- Release Date：2019/04/15 11:30
Differences in the mounting dimensions and sizes between the pulse output blocks FX2N-1PG and FX3U-1PG

The external and mounting dimensions of the FX2N-1PG and the FX3U-1PG are identical. However, the electrical specifications and connectable FX programmable c... More Details >>
- No：24905
- Release Date：2019/04/15 11:31
Number of FX3U-1PG pulse output blocks that can be connected to the FX3U/FX3UC main unit

For the FX3U series, up to eight FX3U-1PGs can be connected. For the FX3UC series, up to six FX3U-1PGs can be connected. 　　 * To connect the FX3U-1PG to the... More Details >>
- No：24973
- Release Date：2019/04/23 07:19
Output frequency of the FX3U-1PG pulse output block

It is from 1 Hz to 200 kHz. More Details >>
- No：24981
- Release Date：2019/04/23 07:21
Parameter setting of FX3U-1PG

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (positioning parameter selection). Select ... More Details >>
- No：24917
- Release Date：2019/04/17 11:40
Changing the JOG speed in the FX3U-20SSC-H

Since the JOG speed is the positioning parameter, turn off and on the positioning parameter enable command (X-axis: BFM#519.b4, Y-axis: BFM#619.b4) to enable... More Details >>
- No：24987
- Release Date：2019/04/23 07:22

1-10 of Total 20

Inquiries

page top