When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

For issuance of a certificate, please consult your local Mitsubishi representative.

The station number setting is not required for non-protocol communication.

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. Howeve

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller i

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP i

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

1-10 of Total 43

prev 1 / 5page next

Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
Certificate of non-applicability to export MELSEC-F to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22264
- Release Date：2018/08/30 13:48
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
Compliance of the FX programmable controllers with the EU RoHS Directive

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your local Mitsubishi Electric representa... More Details >>
- No：24888
- Release Date：2019/04/15 08:07
Repair term for the FX programmable controllers after discontinuation of production

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. However, some products cannot be repaired d... More Details >>
- No：24996
- Release Date：2019/04/23 10:41
Necessity for installing a noise filter

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller is used in an environment with much no... More Details >>
- No：22283
- Release Date：2018/08/30 13:48
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16

1-10 of Total 43

Inquiries

page top