The FX2N-16CCL-M cannot be set as the master station in the parameter setting. Use the FROM/TO instructions and set in

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligen

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications),

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. * When the

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

E-mail sending function is supported, but receiving function is not available.

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

The CC-Link version of FX2N-16CCL-M is Ver.1.10.

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

21-30 of Total 43

prev 3 / 5page next

Setting of the FX2N-16CCL-M

The FX2N-16CCL-M cannot be set as the master station in the parameter setting. Use the FROM/TO instructions and setin the program. More Details >>
- No：25001
- Release Date：2019/04/23 10:39
Connecting local stations to the FX3U-16CCL-M

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligent device stations can be connected to... More Details >>
- No：24791
- Release Date：2019/02/28 09:06
Using the FX3U-ENET-ADP and the RS-232C/RS-485 together (FX3U/FX3UC series)

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications), can be used for the FX3U/FX3UC series... More Details >>
- No：24686
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:16
Connection of the FX3GC series and FX3U-ENET-ADP

Since the FX3U-ENET-ADP can be connected directly to the FX3GC series, optional equipment is not required. 　 * When the FX3U-ENET-ADP is used with other spe... More Details >>
- No：24976
- Release Date：2019/04/23 07:20
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
E-mail sending/receiving function of the FX3U-ENET-L

E-mail sending function is supported, but receiving function is not available. More Details >>
- No：24930
- Release Date：2019/04/17 11:39
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
CC-Link version of FX2N-16CCL-M

The CC-Link version ofFX2N-16CCL-M is Ver.1.10. More Details >>
- No：24992
- Release Date：2019/04/23 10:38
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16

21-30 of Total 43

Inquiries

page top