The CC-Link version of FX2N-16CCL-M is Ver.1.10.

GX Works2 with Ver. 1.87R or later is required.

E-mail sending function is supported, but receiving function is not available.

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

It cannot be freely switched. It is automatically switched according to the auto detection function.

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two perso

The station number setting is not required for non-protocol communication.

It can be used in the FX3G series main units with Ver. 1.10 or later.

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

21-30 of Total 43

prev 3 / 5page next

CC-Link version of FX2N-16CCL-M

The CC-Link version ofFX2N-16CCL-M is Ver.1.10. More Details >>
- No：24992
- Release Date：2019/04/23 10:38
Settings for the FX3U-ENET-ADP

GX Works2 with Ver. 1.87R or later is required.　 More Details >>
- No：24781
- Release Date：2019/02/27 16:10
E-mail sending/receiving function of the FX3U-ENET-L

E-mail sending function is supported, but receiving function is not available. More Details >>
- No：24930
- Release Date：2019/04/17 11:39
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
Switching network between 10BASE-T and 100BASE-TX of the FX3U-ENET-L

It cannot be freely switched. It is automatically switched according to the auto detection function. More Details >>
- No：24964
- Release Date：2019/04/23 07:18
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59
Maximum number of personal computers that can be communicated with the FX3U-ENET-L simultaneously

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two personal computers can be used. In additi... More Details >>
- No：24920
- Release Date：2019/04/17 11:41
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16

21-30 of Total 43

Inquiries

page top