It can be used in the FX3G series main units with Ver. 1.10 or later.

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

One FX3U-16CCL-M can be connected to the FX3U series.

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligen

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

One FX3U-ENET-L can be connected.

No, it is not necessary because power is supplied internally from the main unit.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

21-30 of Total 43

prev 3 / 5page next

Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
Number of FX3U-16CCL-M CC-Link master blocks that can be connected to the FX3U series

One FX3U-16CCL-M can be connected to the FX3U series. More Details >>
- No：25009
- Release Date：2019/04/23 11:11
Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
Connecting local stations to the FX3U-16CCL-M

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligent device stations can be connected to... More Details >>
- No：24791
- Release Date：2019/02/28 09:06
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59
Number of FX3U-ENET-L Ethernet interface blocks that can be connected to the FX3U series

One FX3U-ENET-L can be connected. More Details >>
- No：24939
- Release Date：2019/04/18 14:24
Power supply of the FX3U-ENET-ADP Ethernet communication special adapter

No, it is not necessary because power is supplied internally from the main unit. More Details >>
- No：24921
- Release Date：2019/04/17 11:41

21-30 of Total 43

Inquiries

page top