The master block model is FX3U-128BTY-M. The FX3U-128BTY-M is compatible with the AnyWire Bitty series.

One FX3U-16CCL-M can be connected to the FX3U series.

It cannot be freely switched. It is automatically switched according to the auto detection function.

Up to 4 connections can be opened.

The FX2N-16CCL-M cannot be set as the master station in the parameter setting. Use the FROM/TO instructions and set in t

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.

When writing parameters first time, write the parameters for Ethernet (data of FX Configurator-RN-L) from a personal com

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is

The frame type supported by MC protocol is equivalent to A-compatible 1E frame.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

1-10 of Total 43

prev 1 / 5page next

AnyWire-compatible master block of the FX programmable controller

The master block model is FX3U-128BTY-M. The FX3U-128BTY-M is compatible with the AnyWire Bitty series. More Details >>
- No：24923
- Release Date：2019/04/17 11:41
Number of FX3U-16CCL-M CC-Link master blocks that can be connected to the FX3U series

One FX3U-16CCL-M can be connected to the FX3U series. More Details >>
- No：25009
- Release Date：2019/04/23 11:11
Switching network between 10BASE-T and 100BASE-TX of the FX3U-ENET-L

It cannot be freely switched. It is automatically switched according to the auto detection function. More Details >>
- No：24964
- Release Date：2019/04/23 07:18
MELSOFT connection of the FX3U-ENET-ADP Ethernet communication special adapter

Up to 4 connections can be opened. More Details >>
- No：24903
- Release Date：2019/04/15 11:31
Setting of the FX2N-16CCL-M

The FX2N-16CCL-M cannot be set as the master station in the parameter setting. Use the FROM/TO instructions and setin the program. More Details >>
- No：25001
- Release Date：2019/04/23 10:39
Setting of the FX3U-ENET-ADP Ethernet communication special adapter

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.　 More Details >>
- No：24875
- Release Date：2019/04/15 08:06
Connecting the FX3U-ENET-L whose parameters have not been set

When writing parameters first time, write the parameters for Ethernet (data of FX Configurator-RN-L) from a personal computer to a programmable controller ma... More Details >>
- No：24790
- Release Date：2019/02/28 09:08
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
MC protocol supported by the FX3U-ENET-L

The frame typesupported byMC protocol is equivalent to A-compatible 1E frame. More Details >>
- No：24702
- Release Date：2019/02/27 08:59

1-10 of Total 43

Inquiries

page top