When using a motor with an encoder by performing auto tuning, you need to choose the operation mode or continuous operat

You can input current from the terminal AM of the inverter to the programmable controller (for A/D conversion) and contr

When performing the automatic restart after instantaneous power failure, input the operation signal (STF or STR) and sel

Leave the setting of Pr.96 as "3". It indicates that auto tuning has been completed and the motor constant has been read

For the inverter with capacity of 160K or higher, the fuse is built in its DC part.

We do not offer book type inverters. Therefore, the S500 is recommended to replace the Z123 because of its compact desig

The specifications of the FR-V200E series do not allow for choosing from "Reset input always enabled" and "Reset input e

To protect personnel from electric shock, it is necessary to provide the circuit with the earth leakage circuit breaker.

1. No operation log is recorded.2. No. However, you can create a state indicating that automatic restart after instantan

Removal of the jumper between the terminals P1 and P is not necessary unless you are using the DC reactor.Set Pr.30 = "0

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

91-100 of Total 1306

prev 10 / 131page next

Cycle operation mode, continuous operation mode, torque characteristic selection

When using a motor with an encoder by performing auto tuning, you need to choose the operation mode or continuous operation mode depending on the application... More Details >>
- No：21661
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
Load current limit of inverter

You can input current from the terminal AM of the inverter to the programmable controller (for A/D conversion) and control the speed with the software of the... More Details >>
- No：21419
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Inverter operation at instantaneous power failure

When performing the automatic restart after instantaneous power failure, input the operation signal (STF or STR) and selection of automatic restart after ins... More Details >>
- No：21371
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Offline auto tuning

Leave the setting of Pr.96 as "3". It indicates that auto tuning has been completed and the motor constant has been read. When it is changed unnecessarily, t... More Details >>
- No：21352
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700
Inverter built-in fuse

For the inverter with capacity of 160K or higher, the fuse is built in its DC part. More Details >>
- No：20940
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
Suggestion for replacement of inverters

We do not offer book type inverters. Therefore, the S500 is recommended to replace the Z123 because of its compact design. If regenerative driving matters, c... More Details >>
- No：22104
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-Z123 , FREQROL-Z024
Reset selection

The specifications of the FR-V200E series do not allow for choosing from "Reset input always enabled" and "Reset input enabled only when the protective funct... More Details >>
- No：22031
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-V200
Earth leakage detection of the inverter

To protect personnel from electric shock, it is necessary to provide the circuit with the earth leakage circuit breaker.The inverter and motor circuits also ... More Details >>
- No：22006
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Peripheral devices
Operation of automatic restart after instantaneous power failure

1. No operation log is recorded.2. No. However, you can create a state indicating that automatic restart after instantaneous power failure is in progress by ... More Details >>
- No：21948
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Terminals P1 and P

Removal of the jumper between the terminals P1 and P is not necessary unless you are using the DC reactor.Set Pr.30 = "0" when using the brake unit.Since set... More Details >>
- No：21921
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ

91-100 of Total 1306

Inquiries

page top