You can do so by setting Pr.73 to "10" or "11". (For A700/F700 (P), supply negative input to the terminal 1.)

The undervoltage warning of the inverter is judged based on the voltage of the main circuit as follows. Power failure on

When Pr.551 is set to "3" (Command right to the USB connector at the PU operation), or when the USB is connected, the op

Normally, the auto tuning condition depends on the combination of the inverter and motor (including wiring to the motor)

When Pr.79 is set to "3", since the start command is in the External operation mode, the RUN key of FR-PA07 does not wor

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode

The 800 series supports the multiple rating. Thus, the rated current of the corresponding motor is 40% or higher of the

Auto tuning can be performed because the motor is one rank lower than the inverter capacity.

To set the frequency via CC-Link communication, the NET mode should be selected. The new parameter setting is applied af

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

991-1000 of Total 1292

prev 100 / 130page next

Frequency setting

You can do so by setting Pr.73 to "10" or "11". (For A700/F700 (P), supply negative input to the terminal 1.) More Details >>
- No：21908
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Undervoltage warning

The undervoltage warning of the inverter is judged based on the voltage of the main circuit as follows. Power failure only at the main circuit: Output an und... More Details >>
- No：20853
- Release Date：2018/08/22 16:24
- Category： FREQROL-A800 , FREQROL-F800
Operation mode switch of the FR-A800/F800

When Pr.551 is set to "3" (Command right to the USB connector at the PU operation), or when the USB is connected, the operation is not switched. More Details >>
- No：20861
- Release Date：2018/08/22 16:24
- Category： FREQROL-A800 , FREQROL-F800
Auto tuning

Normally, the auto tuning condition depends on the combination of the inverter and motor (including wiring to the motor), perform auto tuning each time. The ... More Details >>
- No：21293
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700PJ
FR-PA07

When Pr.79 is set to "3", since the start command is in the External operation mode, the RUN key of FR-PA07 does not work. More Details >>
- No：21303
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
FR-A800 and FR-ALF

Yes, it can. More Details >>
- No：20806
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Options , FREQROL-A800
Operation panel

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode is enabled and the "MON" LED blinks s... More Details >>
- No：21075
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
Auto tuning

The 800 series supports the multiple rating. Thus, the rated current of the corresponding motor is 40% or higher of the inverter rated current. (Using a moto... More Details >>
- No：21085
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
Offline auto tuning

Auto tuning can be performed because the motor is one rank lower than the inverter capacity. More Details >>
- No：21351
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700PJ
CC-Link

To set the frequency via CC-Link communication, the NET mode should be selected. The new parameter setting is applied after powering OFF and then ON the inve... More Details >>
- No：21763
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P

991-1000 of Total 1292

Inquiries

page top