Yes, it is preferred. The accuracy becomes worse when the gap between the setting value and actual value increases.

Yes. When Pr.9 = 0, turning is performed with the inverter rated current. Always set the rated motor current.

It is based on the motor rated torque.

Square wave input is not recommended since it can cause failures (for example, damage the diode bridge).

Yes, you can use the 10BASE-T cable (straight) with the E500.

The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Ele

1. It is OK to open MC on the output side while the inverter is operating.2. It is OK to open the input side in case of

The fault output terminals A and C, and B and C of the power regeneration converter FR-RC are not capable of a micro loa

Yes, but the optional kit (FR-A7NC E kit) is necessary.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

1011-1020 of Total 1292

prev 102 / 130page next

FR-A800-CRN

Yes, it is preferred. The accuracy becomes worse when the gap between the setting value and actual value increases. More Details >>
- No：20932
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL
FR-A800

Yes. When Pr.9 = 0, turning is performed with the inverter rated current. Always set the rated motor current. More Details >>
- No：20897
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL
Load characteristics fault detection

It is based on the motor rated torque. More Details >>
- No：20895
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800
Inverter input power supply

Square wave input is not recommended since it can cause failures (for example, damage the diode bridge). More Details >>
- No：22106
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-E500
Operation panel extension cable

Yes, you can use the 10BASE-T cable (straight) with the E500. More Details >>
- No：22085
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
Reset command during operation

The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Electric FA Center can inspect the inver... More Details >>
- No：22065
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Power supply ON/OFF

1. It is OK to open MC on the output side while the inverter is operating.2. It is OK to open the input side in case of emergency stop. More Details >>
- No：21972
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Fault output terminal load pattern

The fault output terminals A and C, and B and C of the power regeneration converter FR-RC are not capable of a micro load of 5 VDC±5%, 10 mA. The minimum loa... More Details >>
- No：21966
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
CC-Link

Yes, but the optional kit (FR-A7NC E kit) is necessary. More Details >>
- No：21877
- Release Date：2018/08/22 16:29
- Category： FREQROL-E700
Auto tuning

Yes. More Details >>
- No：21749
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700

1011-1020 of Total 1292

Inquiries

page top