The setting is enabled at the Y24 start-up. The frequency cannot be changed when Y24 is always ON. Turn ON Y24 when writ

There are two holes at the bottom of the EMC filter. The bigger hole at the lower part is for wire. Put the screwdriver

If the command is 0.01 Hz or higher, the positioning control is performed.

□□□□□□ Year Month (Control number) The last digit of the production year is indicated as the Year, and the Month is indi

Since the lower limit has been internally set, the setting value of 3 % or less is recognized as 3%.

Since the standard bearing is adopted for the belt drive models, a creep may occur and the motor bracket may wear out.

The calculation is performed by two modes. One method calculates the current winding diameter automatically by moving th

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ve

It is possible when the dancer control and tension sensor feedback speed control is used and the PID calculation is turn

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

1021-1030 of Total 1306

prev 103 / 131page next

PLC function

The setting is enabled at the Y24 start-up. The frequency cannot be changed when Y24 is always ON. Turn ON Y24 when writing a frequency. More Details >>
- No：21048
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800
EMC filter (SF1306)

There are two holes at the bottom of the EMC filter. The bigger hole at the lower part is for wire. Put the screwdriver into the small hole at the upper part... More Details >>
- No：21028
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL
MM-FR-A800

If the command is 0.01 Hz or higher, the positioning control is performed. More Details >>
- No：21001
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR-BSF-01

□□□□□□ Year Month (Control number) The last digit of the production year is indicated as the Year, and the Month is indicated by 1 to 9, X (October), Y (Nove... More Details >>
- No：20982
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
FR-A800

Since the lower limit has been internally set, the setting value of 3 % or less is recognized as 3%. More Details >>
- No：20976
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR-A7NS

Yes, it is. More Details >>
- No：20968
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
MM-EF/EFS

Since the standard bearing is adopted for the belt drive models, a creep may occur and the motor bracket may wear out. More Details >>
- No：20964
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Others
FR-A800-R2R

The calculation is performed by two modes. One method calculates the current winding diameter automatically by moving the dancer roll from lower limit positi... More Details >>
- No：20924
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR Configurator2

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No：20913
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR-A800-R2R

It is possible when the dancer control and tension sensor feedback speed control is used and the PID calculation is turned OFF. Because the PID compensation ... More Details >>
- No：20889
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800

1021-1030 of Total 1306

Inquiries

page top