Pre-excitation is the process to control current while a motor is stopped so that motor torque can be generated immediat

The key sheet fixed to the inverter is used for operation. Therefore, the conventional parameter unit cannot be used. (T

The inverter has the automatic restart after instantaneous power failure function. By setting Pr.61 to other than "9999"

You can use the inverter for a general industrial purpose, but you must be very careful because the functions are tailor

For an inverter with the terminal AU, use the terminal AU. For other inverters, assign the AU function to an unused term

Adjust the terminal 2 bias with Pr.C2 and Pr.C3, and the terminal 2 gain with Pr.125 and Pr.C4. Set Pr.C2 (Terminal 2 fr

Even while the inverter is operating, you can use the setting dial to change the frequency and then press the SET key an

This is because the protective function works to stop the motor. It is not a fault indication.To cancel the protective f

If any other frequency is not set, when the start signal is input, the inverter starts acceleration from 0.5 Hz set with

To enable the frequency setting with the setting dial and multi-speed setting, set Pr.79 to "3". Note that multi-speed s

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

1071-1080 of Total 1292

prev 108 / 130page next

Pre-excitation, zero-speed control, and servo lock

Pre-excitation is the process to control current while a motor is stopped so that motor torque can be generated immediately. There are two methods for this p... More Details >>
- No：21562
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
Are conventional parameter units still available?

The key sheet fixed to the inverter is used for operation. Therefore, the conventional parameter unit cannot be used. (There is no connector to connect it.)O... More Details >>
- No：21597
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Automatic restart after instantaneous power failure

The inverter has the automatic restart after instantaneous power failure function. By setting Pr.61 to other than "9999", the encoder detects the speed of th... More Details >>
- No：21642
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
Application to general industrial purpose

You can use the inverter for a general industrial purpose, but you must be very careful because the functions are tailored to fans and pumps. 　(for example, ... More Details >>
- No：21651
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A100
Terminal

For an inverter with the terminal AU, use the terminal AU. For other inverters, assign the AU function to an unused terminal. And, short-circuit (turn ON) th... More Details >>
- No：21678
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Frequency setting

Adjust the terminal 2 bias with Pr.C2 and Pr.C3, and the terminal 2 gain with Pr.125 and Pr.C4. Set Pr.C2 (Terminal 2 frequency setting bias frequency) to 20... More Details >>
- No：21685
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Frequency setting

Even while the inverter is operating, you can use the setting dial to change the frequency and then press the SET key and the inverter operates at the new fr... More Details >>
- No：21739
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Operation panel

This is because the protective function works to stop the motor. It is not a fault indication.To cancel the protective function, turn OFF the start signal an... More Details >>
- No：21775
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Minimum frequency

If any other frequency is not set, when the start signal is input, the inverter starts acceleration from 0.5 Hz set with Pr.13 (Starting frequency) up to 3 H... More Details >>
- No：21777
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Operation mode setting

To enable the frequency setting with the setting dial and multi-speed setting, set Pr.79 to "3". Note that multi-speed setting is prioritized over setting us... More Details >>
- No：21852
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ

1071-1080 of Total 1292

Inquiries

page top