It is not grounded to the enclosure due to the resin coating.

Number of terminals: Same input terminals as the A700 series, and the following two terminals are added. Safety: SI1, SI

They cannot be set with the frequency. Because the command is input at the line speed, consider the line speed of the in

These parameters are used for the communication compatible with the communication protocol of the Ethernet IP of the HMS

The following seven models are available for the 200 V class: 0.1K, 0.2K, 0.4K, 0.75K, 1.5K, 2.2K, and 3.7K The followin

1. You can connect them using △ connection. 2. No problem with connecting four Y-△ motors. (Connect all four motors usin

The communication via the MELSECNET is not available.

You can use the following two methods:1. Turn ON MRS at the same time when STF turns OFF.2. Set Pr.10 = 60 Hz, Pr.11 = 0

When the heat sink is outside, since the heat sink and fan are not waterproof, you need to enclose them so that they are

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

1281-1290 of Total 1306

prev 129 / 131page next

FR-BSF01

It is not grounded to the enclosure due to the resin coating. More Details >>
- No：21122
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Options
FR-A800

Number of terminals: Same input terminals as the A700 series, and the following two terminals are added. Safety: SI1, SI2, SIC 24 V power supply: +24 * The t... More Details >>
- No：21099
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800
Common bus connection

Yes. More Details >>
- No：21009
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800
FR-A800-R2R

They cannot be set with the frequency. Because the command is input at the line speed, consider the line speed of the initial winding diameter at 20 Hz. The ... More Details >>
- No：20888
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800 "Parameter for the communication setting"

These parameters are used for the communication compatible with the communication protocol of the Ethernet IP of the HMS optional circuit board (A8NEIP_2P). More Details >>
- No：20824
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Model configuration

The following seven models are available for the 200 V class: 0.1K, 0.2K, 0.4K, 0.75K, 1.5K, 2.2K, and 3.7K The following five models are available for the 4... More Details >>
- No：21621
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
Compatibility with Y-△ motor and others

1. You can connect them using △ connection. 2. No problem with connecting four Y-△ motors. (Connect all four motors using △ connection.) (Note that the inver... More Details >>
- No：21487
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Others
Seamless communication of FR Configurator SW3

The communication via the MELSECNET is not available. More Details >>
- No：20830
- Release Date：2018/08/22 16:24
- Category： Engineering Software
How can I have the motor coast to stop?

You can use the following two methods:1. Turn ON MRS at the same time when STF turns OFF.2. Set Pr.10 = 60 Hz, Pr.11 = 0 sec, and Pr.12 = 0% (when the invert... More Details >>
- No：21967
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
FR-A5CN

When the heat sink is outside, since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of water. More Details >>
- No：21435
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options

1281-1290 of Total 1306

Inquiries

page top