Because the H0F monitor only observes the ON/OFF of the hardware, it cannot be checked.

The communication is established if DA, DB, and DG are connected each other.

The FR-A5AY cannot be used in the FR-A700 (F700(P)). It cannot be installed due to the difference of the connector shape

The ferrule terminal or single wire can be used for the control circuit wiring.

The noise filter is not built-in the FR-E700 series. It is built in the FR-A700/F700 series with the 55K or lower capaci

It can be driven by connecting single-phase 200 V to the terminals R and S. In this case, the load current must be one-t

It is available since June, 2007. The model is FR-E7TR.

The wound rotor motor can be used in the same way as cage-induction motors by shortening the resistor at the secondary s

The instantaneous power failure error occurs when the power is turned ON instantaneously (within 100 ms) after the power

Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque fo

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

151-160 of Total 1292

prev 16 / 130page next

Checking bit state by CC-Link communication

Because the H0F monitor only observes the ON/OFF of the hardware, it cannot be checked. More Details >>
- No：21230
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
Wiring of CC-Link communication cable

The communication is established if DA, DB, and DG are connected each other. More Details >>
- No：21239
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
FR-A5AY

The FR-A5AY cannot be used in the FR-A700 (F700(P)). It cannot be installed due to the difference of the connector shape. More Details >>
- No：21260
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Wiring and terminal

The ferrule terminal or single wire can be used for the control circuit wiring. More Details >>
- No：21275
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700
Noise filter

The noise filter is not built-in the FR-E700 series. It is built in the FR-A700/F700 series with the 55K or lower capacity. More Details >>
- No：21276
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700
Specifications

It can be driven by connecting single-phase 200 V to the terminals R and S. In this case, the load current must be one-third or less of the inverter rated cu... More Details >>
- No：21282
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700
RS-485 communication

It is available since June, 2007. The model is FR-E7TR. More Details >>
- No：21300
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700
Issues of driving the wound rotor motor inverter

The wound rotor motor can be used in the same way as cage-induction motors by shortening the resistor at the secondary side. More Details >>
- No：21370
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Interval of next power ON

The instantaneous power failure error occurs when the power is turned ON instantaneously (within 100 ms) after the power is turned OFF. When the motor is coa... More Details >>
- No：21388
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Motor characteristics at low input voltage

Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque for the input voltage of 380 V. Therefo... More Details >>
- No：21434
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200

151-160 of Total 1292

Inquiries

page top