1. No operation log is recorded.2. No. However, you can create a state indicating that automatic restart after instantan

The SF1258 has the terminal cover.Although the SF1259 to SF1263 do not have the terminal covers and their terminals are

If the current increases when the motor stops under V/F control (at low speed under a light load), the motor is consider

To use an inverter using the external contact coast to stop (to shut off the inverter's output), short-circuit the termi

For a single-phase 200 V power supply, you can use the FR-E520S series for up to 0.75 kW motor.If you use the three-phas

1. The 100% braking torque means the 100% motor rated torque. Do not consider the continuous regenerative driving based

It is not possible to generate torque larger than the maximum possible torque of the motor by increasing the inverter's

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter

1. You can implement stop-on-contact.2. When implementing stop-on-contact, use the inverter to decelerate the motors to

A motor overheats (the current increases) when the load is heavy.When the electronic thermal O/L relay works, you need t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

251-260 of Total 1306

prev 26 / 131page next

Operation of automatic restart after instantaneous power failure

1. No operation log is recorded.2. No. However, you can create a state indicating that automatic restart after instantaneous power failure is in progress by ... More Details >>
- No：21948
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
EMC compliant filter terminal cover

The SF1258 has the terminal cover.Although the SF1259 to SF1263 do not have the terminal covers and their terminals are bare, rubber tubes to cover them are ... More Details >>
- No：21956
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Current increase at motor stop

If the current increases when the motor stops under V/F control (at low speed under a light load), the motor is considered to be in the overexcitation state.... More Details >>
- No：21997
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Coasting operation of the inverter

To use an inverter using the external contact coast to stop (to shut off the inverter's output), short-circuit the terminals MRS and SD.For CC-Link operation... More Details >>
- No：22003
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Single-phase power supply drive

For a single-phase 200 V power supply, you can use the FR-E520S series for up to 0.75 kW motor.If you use the three-phase 200 V power supply inverter with a ... More Details >>
- No：22015
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
FR-RC selection

1. The 100% braking torque means the 100% motor rated torque. Do not consider the continuous regenerative driving based on the braking torque. Consider the r... More Details >>
- No：22023
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Two-rank up maximum short-time torque

It is not possible to generate torque larger than the maximum possible torque of the motor by increasing the inverter's capacity.Even when the inverter is up... More Details >>
- No：22027
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Common terminals of control circuit

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter's noise may be input to the control ... More Details >>
- No：22037
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Stop-on-contact control

1. You can implement stop-on-contact.2. When implementing stop-on-contact, use the inverter to decelerate the motors to reduce the impact upon stop-on-contac... More Details >>
- No：22041
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Consideration on thermal

A motor overheats (the current increases) when the load is heavy.When the electronic thermal O/L relay works, you need to mitigate the load.If the current is... More Details >>
- No：22042
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL

251-260 of Total 1306

Inquiries

page top