When the frequency setting value is written by the CC-Link to EEPROM, the frequency setting value set with the PU (opera

The error indicates that the parameter setting of the PLC function is not set. It is considered that the PC parameter is

They cannot be set with the frequency. Because the command is input at the line speed, consider the line speed of the in

It is based on the motor rated torque.

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ve

A tension sensor such as a dancer roll is required for speed control. Because an actual line speed input is required for

By inputting the rope length, the speed command is sent to suppress a swinging.

The same value is displayed in the initial setting. When negative output is enabled by setting "0" to Pr.290 (Monitor ne

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

261-270 of Total 1292

prev 27 / 130page next

Frequency setting by the CC-Link

When the frequency setting value is written by the CC-Link to EEPROM, the frequency setting value set with the PU (operation panel) is changed. More Details >>
- No：20851
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL
Built-in PLC function

The error indicates that the parameter setting of the PLC function is not set. It is considered that the PC parameter is not checked when the PC parameter an... More Details >>
- No：20859
- Release Date：2018/08/22 16:24
- Category： FREQROL-A800 , FREQROL-F800
FR-A800-R2R

They cannot be set with the frequency. Because the command is input at the line speed, consider the line speed of the initial winding diameter at 20 Hz. The ... More Details >>
- No：20888
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Load characteristics fault detection

It is based on the motor rated torque. More Details >>
- No：20895
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800
FR Configurator2

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No：20913
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR-A800-R2R

A tension sensor such as a dancer roll is required for speed control. Because an actual line speed input is required for the winding diameter calculation by ... More Details >>
- No：20926
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-CRN

By inputting the rope length, the speed command is sent to suppress a swinging. More Details >>
- No：20935
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL
Difference in the monitor function

The same value is displayed in the initial setting. When negative output is enabled by setting "0" to Pr.290 (Monitor negative output selection), there are f... More Details >>
- No：20938
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL
FR-A7NS

Yes, it is. More Details >>
- No：20968
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
FR-A8AZ

It is 12 bits (4096). More Details >>
- No：20969
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options

261-270 of Total 1292

Inquiries

page top