When the high power factor converter is installed, you can use the conversion coefficient of K5 = 0 for calculation. In

When measuring current, if you open the output side while current is flowing on the input side, high voltage is induced

For frequency setting, multi-speed setting is prioritized over current input. Therefore, when the multi-speed signal is

No. Although the carrier frequency increases or decreases the switching count, the switching speed is the OFF-to-ON spee

When the wire between the 400 V inverter and motor is long (20 m or longer), surge voltage occurs momentarily. This volt

The current value can be displayed on the operation panel without regard to the setting of monitor-related parameters. A

Although you can connect an analog or digital indicator to the terminal FM, use an analog indicator since the wiring len

Since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of wa

Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque fo

When the heat sink is outside, since the heat sink and fan are not waterproof, you need to enclose them so that they are

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

271-280 of Total 1306

prev 28 / 131page next

Countermeasure against harmonics

When the high power factor converter is installed, you can use the conversion coefficient of K5 = 0 for calculation. In accordance with the harmonic suppress... More Details >>
- No：21398
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Others
Current measurement method

When measuring current, if you open the output side while current is flowing on the input side, high voltage is induced and dielectric breakdown may occur wi... More Details >>
- No：21399
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Priority of multi-speed setting and frequency setting signals

For frequency setting, multi-speed setting is prioritized over current input. Therefore, when the multi-speed signal is input, the inverter switch to multi-s... More Details >>
- No：21400
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Surge voltage of 400 V inverter

No. Although the carrier frequency increases or decreases the switching count, the switching speed is the OFF-to-ON speed of the IGBT element of the inverter... More Details >>
- No：21401
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-F500 , FREQROL-A024 , FREQROL-E500 , FREQROL-V200 , FREQROL-A200 , FREQROL-S500 , FREQROL-A100
Surge voltage of 400 V motor

When the wire between the 400 V inverter and motor is long (20 m or longer), surge voltage occurs momentarily. This voltage is as two or more times as the DC... More Details >>
- No：21404
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-F500 , FREQROL-A024 , FREQROL-E500 , FREQROL-V200 , FREQROL-A200 , FREQROL-A100
Current value monitor

The current value can be displayed on the operation panel without regard to the setting of monitor-related parameters. As the current value remains 0 A, the ... More Details >>
- No：21405
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Long wire to terminal FM

Although you can connect an analog or digital indicator to the terminal FM, use an analog indicator since the wiring length is long. (The maximum wiring leng... More Details >>
- No：21415
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
FR-A5CN03

Since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of water. If you use the inverter (heat si... More Details >>
- No：21433
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Motor characteristics at low input voltage

Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque for the input voltage of 380 V. Therefo... More Details >>
- No：21434
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200
FR-A5CN

When the heat sink is outside, since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of water. More Details >>
- No：21435
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options

271-280 of Total 1306

Inquiries

page top