Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-

Since the input power factor is improved to approximately 1, the power supply capacity can be reduced to 2/3 to 3/4 of a

By using the reactors 1 and 2 as well as the outside box supplied with the high power factor converter, while the noise

The output voltage is approximately 300 VDC for the 200 V class and approximately 600 VDC for the 400 V class. The outp

Continuous 100% regenerative braking torque is available for the rated capacity of the high power factor converter. (The

Be sure to use a high power factor converter with the capacity higher than the total capacity of the inverters connected

Up to 6 units. If you connect 7 or more inverters, the permissible output of control signals is exceeded. Be sure to use

Protective functions against the power supply fault, overcurrent, element fault, undervoltage, and transistor thermal fa

The following amount of heat is generated under the 100% load. (The same amount for both the 200 V and 400 V classes. Th

Since the existing inverters do not have a terminal to connect to the FR-HC, it cannot be connected to them. Use an inve

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

321-330 of Total 1306

prev 33 / 131page next

Control cable between high power factor converter and inverter

Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-response is required to shut off the ... More Details >>
- No：21555
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Power supply capacity

Since the input power factor is improved to approximately 1, the power supply capacity can be reduced to 2/3 to 3/4 of an inverter without a power factor imp... More Details >>
- No：21556
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Influence on noise level

By using the reactors 1 and 2 as well as the outside box supplied with the high power factor converter, while the noise may increase or decrease depending th... More Details >>
- No：21559
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Output voltage

The output voltage is approximately 300 VDC for the 200 V class and approximately 600 VDC for the 400 V class. 　The output voltage fluctuates due to fluctuat... More Details >>
- No：21561
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Regenerative driving capability

Continuous 100% regenerative braking torque is available for the rated capacity of the high power factor converter. (The same braking ability of the FR-A201 ... More Details >>
- No：21563
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Inverter selection when multiple inverters are to be connected

Be sure to use a high power factor converter with the capacity higher than the total capacity of the inverters connected. (Note: One or more of the inverters... More Details >>
- No：21565
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Connecting multiple inverters to single high power factor converter

Up to 6 units. If you connect 7 or more inverters, the permissible output of control signals is exceeded. Be sure to use a high power factor converter with t... More Details >>
- No：21566
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Protective functions

Protective functions against the power supply fault, overcurrent, element fault, undervoltage, and transistor thermal fault (inverter protection) are availab... More Details >>
- No：21567
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Amount of heat generated

The following amount of heat is generated under the 100% load. (The same amount for both the 200 V and 400 V classes. The amount of heat generated by the bui... More Details >>
- No：21568
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
Combination with existing inverters

Since the existing inverters do not have a terminal to connect to the FR-HC, it cannot be connected to them. Use an inverter compatible with the high power f... More Details >>
- No：21569
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options

321-330 of Total 1306

Inquiries

page top