The MM-BF and MM-CF are not compliant. The MM-GKR is compliant with the UL standard.

Since the lower limit has been internally set, the setting value of 3 % or less is recognized as 3%.

The inverter itself does not have a function to detect the rotation angle and change the velocity accordingly. Therefore

The AM-5 output is 0 to 10 VDC voltage output.Therefore, you need to install a voltmeter.Also, since the inverter output

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communica

Set Pr.79 to "2" (external operation mode).

This is because the protective function works to stop the motor. It is not a fault indication.To cancel the protective f

Setting Pr.73 to "0" does not generate 10 VDC output.The inverter itself only has 5 V at the terminal 10.Setting this pa

Check the setting value of Pr.414 (PLC function operation selection) and if the initial value: 0 (PLC function disabled)

A tension sensor such as a dancer roll is required for speed control. Because an actual line speed input is required for

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

321-330 of Total 1292

prev 33 / 130page next

UL standard

The MM-BF and MM-CF are not compliant. The MM-GKR is compliant with the UL standard. More Details >>
- No：21005
- Release Date：2018/08/22 16:25
- Category： Magnet motor drive
FR-A800

Since the lower limit has been internally set, the setting value of 3 % or less is recognized as 3%. More Details >>
- No：20976
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
Angular velocity change control

The inverter itself does not have a function to detect the rotation angle and change the velocity accordingly. Therefore, to implement required control, it i... More Details >>
- No：22086
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-V200
Installation method of AM-5 terminal ammeter

The AM-5 output is 0 to 10 VDC voltage output.Therefore, you need to install a voltmeter.Also, since the inverter output current is displayed, the scale of t... More Details >>
- No：22016
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-F500
CC-Link

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communication operation command source) and Pr... More Details >>
- No：21837
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Operation mode setting value

Set Pr.79 to "2" (external operation mode).　　　 More Details >>
- No：21818
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Operation panel

This is because the protective function works to stop the motor. It is not a fault indication.To cancel the protective function, turn OFF the start signal an... More Details >>
- No：21775
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
10 VDC voltage from terminal 10

Setting Pr.73 to "0" does not generate 10 VDC output.The inverter itself only has 5 V at the terminal 10.Setting this parameter to "0" allows 10 V input betw... More Details >>
- No：21727
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
SW1DND-FRC2 (FR Configurator2)

Check the setting value of Pr.414 (PLC function operation selection) and if the initial value: 0 (PLC function disabled) is set, set "1" or "2" and enable th... More Details >>
- No：21080
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software , FREQROL-A800 , FREQROL-F800
FR-A800-R2R

A tension sensor such as a dancer roll is required for speed control. Because an actual line speed input is required for the winding diameter calculation by ... More Details >>
- No：20926
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800

321-330 of Total 1292

Inquiries

page top