You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting t

You can do so by setting Pr.339 (Communication speed command source) = 1 (external).

For low-speed operation, perform auto tuning and use (Advanced) magnetic flux vector control.

You can use the input terminals X1 to X3 for an input terminal function such as 7-speed operation (high, middle, and low

Under a 50% torque limit, if the commanded speed (50 Hz in your example) cannot be achieved without torque exceeding 50%

Refer to the FR-A700/F700/E700/D700 series TECHNICAL MANUAL (section 3.7.2) and the Technical News. The FR-A700/F700/E70

A capacitive filter and common mode choke are built in. (A common mode choke is built in only for the 55K or lower.) Use

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communica

When both "Hz" and "A" are turned off, the output voltage monitor is active.The display indicates that the output voltag

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

331-340 of Total 1292

prev 34 / 130page next

CC-Link

You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting to stop, deceleration to stop, and con... More Details >>
- No：21892
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Start command, speed command

You can do so by setting Pr.339 (Communication speed command source) = 1 (external).　　 More Details >>
- No：21881
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Magnetic flux vector control

For low-speed operation, perform auto tuning and use (Advanced) magnetic flux vector control. More Details >>
- No：21810
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Input terminal function selection of multi-function series

You can use the input terminals X1 to X3 for an input terminal function such as 7-speed operation (high, middle, and low speed), output stop during motor ope... More Details >>
- No：21601
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Operation under torque limit in the speed control mode

Under a 50% torque limit, if the commanded speed (50 Hz in your example) cannot be achieved without torque exceeding 50%, since the torque does not exceed th... More Details >>
- No：21483
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200
Amount of heat generated

Refer to the FR-A700/F700/E700/D700 series TECHNICAL MANUAL (section 3.7.2) and the Technical News. The FR-A700/F700/E700/D700 series TECHNICAL MANUAL can be... More Details >>
- No：21263
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
EMC filter

A capacitive filter and common mode choke are built in. (A common mode choke is built in only for the 55K or lower.) Use a connector for whether to turn ON o... More Details >>
- No：21094
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800
Safety stop function

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized because of the voltage drop. More Details >>
- No：21053
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800
CC-Link

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communication operation command source) and Pr... More Details >>
- No：21837
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Frequency monitor window

When both "Hz" and "A" are turned off, the output voltage monitor is active.The display indicates that the output voltage is 19.5 V. More Details >>
- No：21782
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ

331-340 of Total 1292

Inquiries

page top