Connecting high power factor converter

You can connect the high power factor converter to an inverter if the inverter supports it. The conventional inverters do not have the high power factor conv... More Details >>

Installation of new serial communication unit FR-CU03

Remove the parameter unit FR-PU03 and install there. (The installation dimensions of the FR-CU03 are the same as the FR-PU.) You can read and write parameter... More Details >>

Can I use it with the single-phase power supply?

You can use the inverter with the single-phase 200 V power supply. However, since ripple current flowing through the capacitor increases and the converter an... More Details >>

What applications are suitable?

Variable speed control of small-capacity motor and other applications for which small size and low cost are required. (Examples: Replacement for gears and pu... More Details >>

A100 inverter loss

The inverter efficiency (power factor) for the inverter alone is approximately 75 to 80%. However, by installing the power factor improving DC reactor to the... More Details >>

Frequency setting

The output frequency is not changed by the maximum frequency setting. It can be changed by the following methods. - Set the frequency on the operation panel.... More Details >>

Brake resistor

It will be the shared type. More Details >>

FR-PA07

Since the FR-PA07 has the back cover and adapter, the FR-E5P is not necessary. More Details >>

FR-PA07

Since the multi-speed is given a higher priority, the setting by the setting dial is not enabled unless all of the multi-speed signals are OFF. More Details >>

Frequency setting signal

Check that the wiring of the terminal 4 and 5 are not reversed. More Details >>