Both settings of Pr.83 and Pr.84 are enabled immediately. However, the output voltage is not changed because the value o

No, it cannot be connected to the RS-485 terminal. The 485 terminal supports the Mitsubishi protocol and Modbus-RTU, but

For the FR-F700P, only dedicated IPM motor (MM-EFS, MM-THE4) can be driven. For the FR-F800, the name is different becau

It controls the charging current immediately after the power is ON. (as a resistor for charging current limit circuit)

The acceleration time is 60 Hz and 5 seconds, and deceleration time is 60 Hz and 60 seconds.

Keep a clearance of "minimum 10cm each on top and bottom and minimum 5cm each on right and left".

Advanced magnetic flux vector control provides a larger torque at low-speed. 3.7K or lower: 0.5 Hz/200%5.5K to 15K: 0.5

The output current monitor of the inverter displays the output current effective value of the three phases measured by t

We recommend the "YM206RI 1 mA" analog ammeter.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

371-380 of Total 1292

prev 38 / 130page next

Connection of the FR-HEL

Yes. More Details >>
- No：20987
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
Vector control

Both settings of Pr.83 and Pr.84 are enabled immediately. However, the output voltage is not changed because the value of Pr.83 has little influence on Vecto... More Details >>
- No：21022
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800
Operation panel

No, it cannot be connected to the RS-485 terminal. The 485 terminal supports the Mitsubishi protocol and Modbus-RTU, but it does not support the PU protocol.... More Details >>
- No：21037
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL
PM motor control

For the FR-F700P, only dedicated IPM motor (MM-EFS, MM-THE4) can be driven. For the FR-F800, the name is different because PM motors manufactured by other co... More Details >>
- No：21061
- Release Date：2018/08/22 16:25
- Category： FREQROL-F800
FR-HC2

It controls the charging current immediately after the power is ON. (as a resistor for charging current limit circuit) More Details >>
- No：21150
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Options
FR-FS

The acceleration time is 60 Hz and 5 seconds, and deceleration time is 60 Hz and 60 seconds. More Details >>
- No：21166
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL
FR-CVL

Keep a clearance of "minimum 10cm each on top and bottom and minimum 5cm each on right and left". More Details >>
- No：21178
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Options
Advanced magnetic flux vector control and General-purpose magnetic flux vector control

Advanced magnetic flux vector control provides a larger torque at low-speed. 3.7K or lower: 0.5 Hz/200%5.5K to 15K: 0.5 Hz/150% More Details >>
- No：21297
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700
Monitor

The output current monitor of the inverter displays the output current effective value of the three phases measured by the current sensor. It does not displa... More Details >>
- No：21373
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Analog ammeter

We recommend the "YM206RI 1 mA" analog ammeter. More Details >>
- No：21402
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options

371-380 of Total 1292

Inquiries

page top