It indicate that the actual number of connectable units differs depending on the master side specification although the

Perform the writing after turning ON the SOF, or after stopping the FR-HC2 by pressing the STOP button. Wire the RDY sig

No, it is not. It is released by the inverter reset that releases E.OHT.

Because the inverter status reading is stopped by the processing such as PLC in the inverter when the main circuit turns

Yes. It can be carried out like under the dancer feedback speed control.

When the value is written to Pr.646 (Stored winding diameter), the stored value is used. When the value is not written,

If Pr.361 = 0, the second terminal can be used as the line speed command when X114 is ON, and as the frequency setting v

Yes, the English version of SW3 is included.

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ve

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

421-430 of Total 1306

prev 43 / 131page next

FR-A800-E

It indicate that the actual number of connectable units differs depending on the master side specification although the maximum number of connectable units o... More Details >>
- No：20839
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-HC2

Perform the writing after turning ON the SOF, or after stopping the FR-HC2 by pressing the STOP button. Wire the RDY signal so that the inverter stops when t... More Details >>
- No：20842
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Options
STOP function of the FR-A800

No, it is not. It is released by the inverter reset that releases E.OHT. More Details >>
- No：20843
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-GF/FR-A800-E

Yes, they can. More Details >>
- No：20856
- Release Date：2018/08/22 16:24
- Category： FREQROL-A800
FR-A8NC

Because the inverter status reading is stopped by the processing such as PLC in the inverter when the main circuit turns ON. It is stopped for approximately ... More Details >>
- No：20873
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Plug-in Options
FR-A800-R2R

Yes. It can be carried out like under the dancer feedback speed control. More Details >>
- No：20885
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-R2R

When the value is written to Pr.646 (Stored winding diameter), the stored value is used. When the value is not written, the minimum or maximum winding diamet... More Details >>
- No：20887
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-R2R

If Pr.361 = 0, the second terminal can be used as the line speed command when X114 is ON, and as the frequency setting value when X114 is OFF. If Pr.361 = 3,... More Details >>
- No：20891
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR Configurator2

Yes, the English version of SW3 is included. More Details >>
- No：20912
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No：20913
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software

421-430 of Total 1306

Inquiries

page top