Use the FREQROL-A500 series inverter with the optional FR-A5NC.Then, you can implement both of stop-on-contact control a

If multiple line noise filters are wound without clearance between them, the noise reduction effect corresponding to the

1. By changing RWw1 while RYD is ON, you can change the inverter's frequency.You cannot do this with RYE. You need to tu

You can use the Hioki Memory HiCorder and clamp-on AC/DC high tester.You can observe the inverter's frequency in one of

You can use general-purpose three-phase induction motors.You can also use geared motors if the motor itself is an induct

The terminal FM output pulse is directly proportional to the inverter output frequency.With the initial setting, 1440 pu

As you mention, when the inverter is operated only with STF without inputting the speed command signal, the minimum freq

Basically, when the motor temperature goes higher, the motor rotation speed goes lower.The motor rotation speed also cha

Since the brake sequence function requires Advanced magnetic flux vector control and advanced flux control is applied to

The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Ele

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

431-440 of Total 1306

prev 44 / 131page next

Inverter stop-on-contact control

Use the FREQROL-A500 series inverter with the optional FR-A5NC.Then, you can implement both of stop-on-contact control and CC-Link operation. More Details >>
- No：22089
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Installation method

If multiple line noise filters are wound without clearance between them, the noise reduction effect corresponding to the number of filters cannot be obtained... More Details >>
- No：22087
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Operation with CC-Link

1. By changing RWw1 while RYD is ON, you can change the inverter's frequency.You cannot do this with RYE. You need to turn OFF and then ON RYE each time you ... More Details >>
- No：22083
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Inverter

You can use the Hioki Memory HiCorder and clamp-on AC/DC high tester.You can observe the inverter's frequency in one of the following two methods:1. Attach t... More Details >>
- No：22082
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Which motors can I use with the inverter?

You can use general-purpose three-phase induction motors.You can also use geared motors if the motor itself is an induction motor.Synchronous motors are not ... More Details >>
- No：22081
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Pulse frequency characteristics of terminal FM

The terminal FM output pulse is directly proportional to the inverter output frequency.With the initial setting, 1440 pulses/sec are output at 60 Hz (Pr.55),... More Details >>
- No：22080
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Switching between high speed and low speed

As you mention, when the inverter is operated only with STF without inputting the speed command signal, the minimum frequency must be set to 10 Hz.However, a... More Details >>
- No：22078
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Thermal characteristics of motor

Basically, when the motor temperature goes higher, the motor rotation speed goes lower.The motor rotation speed also changes when the inverter input power su... More Details >>
- No：22076
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Brake sequence function

Since the brake sequence function requires Advanced magnetic flux vector control and advanced flux control is applied to 0.4 kW or higher motors, you cannot ... More Details >>
- No：22075
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Reset command during operation

The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Electric FA Center can inspect the inver... More Details >>
- No：22065
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500

431-440 of Total 1306

Inquiries

page top