Set Pr.146 (Built-in potentiometer switching) to "0".This allows for using the potentiometer built in the FR-PA02 to set

From Z100 to A520: Use the FR-AAT01 to replace the Z100 with the A520. From Z100 to E520: No attachment is available sin

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L

The number of terminals: There are the same output terminals as F700P and the following terminals (2 points) are added.

1. ACL has the input power factor of approximately 90% and DCL has the input power factor of approximately 95%. Therefor

1. Speed fluctuation ratio when using the FR-V200 + dedicated motor (with an encoder) The vector inverter FR-V200 detect

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized

Since a large load is applied to the motor when the electromagnetic clutch turns on, overcurrent may occur if the load i

You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting t

When synchronously operating two motors, you need to detect speed from both motors. Each inverter is controlled based on

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

461-470 of Total 1292

prev 47 / 130page next

Operation panel (FR-PA02)

Set Pr.146 (Built-in potentiometer switching) to "0".This allows for using the potentiometer built in the FR-PA02 to set the frequency.(Set this parameter to... More Details >>
- No：21730
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Replacement of FR-Z100 series

From Z100 to A520: Use the FR-AAT01 to replace the Z100 with the A520. From Z100 to E520: No attachment is available since E520 is a new series. From Z100 to... More Details >>
- No：21447
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options , FREQROL-Z100
FR-A800

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L). For the details, refer to the repl... More Details >>
- No：21108
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-A500
The number of output terminals

The number of terminals: There are the same output terminals as F700P and the following terminals (2 points) are added. Safety: SO, SOC *The terminals SO and... More Details >>
- No：21069
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-F800
Proper use of AC reactor and DC reactor

1. ACL has the input power factor of approximately 90% and DCL has the input power factor of approximately 95%. Therefore, DCL has a higher input power facto... More Details >>
- No：21949
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Speed fluctuation ratio

1. Speed fluctuation ratio when using the FR-V200 + dedicated motor (with an encoder) The vector inverter FR-V200 detects speed by the encoder and speed fluc... More Details >>
- No：21489
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200 , FREQROL-A200
Safety stop function

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized because of the voltage drop. More Details >>
- No：21053
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800
Clutch connection of load

Since a large load is applied to the motor when the electromagnetic clutch turns on, overcurrent may occur if the load is heavy. To ensure that the rated cur... More Details >>
- No：21955
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
CC-Link

You can select deceleration stop by setting Pr.502 (Stop mode selection at communication error). (Select from coasting to stop, deceleration to stop, and con... More Details >>
- No：21892
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Synchronous operation of two motors

When synchronously operating two motors, you need to detect speed from both motors. Each inverter is controlled based on this speed detection signal. As an e... More Details >>
- No：21540
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options , FREQROL-A024

461-470 of Total 1292

Inquiries

page top