Using shielded wires for frequency meter connection

Connect the shield to the terminal SD. More Details >>

FR-BSF01 wiring

The filtering effect is higher as the cable is wound more.However, if the cable is wound more than 4T on the inverter output side, since the inverter's outpu... More Details >>

Can you provide the CAD data?

The CAD data is found on the member's page of Mitsubishi Electric FA Global Website. More Details >>

Inverter communication

Check if the communication setting parameters (Pr.117 to Pr.124) are set to the same values between the inverter and personal computer.Note that communicatio... More Details >>

FR-XC

- Both 200 V and 400 V can be used only with the capacity 22 kW or higher. - The rated current (capacity) is derated. (For the detail, refer to the Instructi... More Details >>

S-shape acceleration/deceleration of the FR-D700

It does not change even when General-purpose magnetic flux vector control is performed. Pr.3 is the inflection point of the S-shape. More Details >>

FR-A800-E

It indicate that the actual number of connectable units differs depending on the master side specification although the maximum number of connectable units o... More Details >>

FR-A701

It is protected not by observing the temperature directly, but by estimating it from the current value, output frequency, and carrier frequency. More Details >>

FR-A800

UVT will occur when reactor is not connected. Always connect a reactor that matches the motor capacity. More Details >>

FR-A800

When the online auto tuning (magnetic field observer) is enabled, the monitoring accuracy is ± 10%. More Details >>