You cannot remove the key sheet from products with the key sheet attached as a standard other than the PU operation type

You can use the input terminals X1 to X3 for an input terminal function such as 7-speed operation (high, middle, and low

Almost same control method. This control also performs vector calculation and divides the inverter's output current into

In addition to speed control, you can also select torque control as well as you can perform position control using an op

Change Pr.18 (High speed maximum frequency) to 400 Hz.If you are using the analog command to set the frequency, calibrat

The fault output terminals A and C, and B and C of the power regeneration converter FR-RC are not capable of a micro loa

With your setting, since Pr.60 assigns the OH function to the terminal PL, and terminals RL and SD are open, an external

If the parameters related to the output voltage are not changed from the initial setting, it is unlikely that the output

The specifications of the FR-V200E series do not allow for choosing from "Reset input always enabled" and "Reset input e

The outline dimension diagram is found on the member's page of Mitsubishi Electric FA Global Website.Contact our sales p

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

511-520 of Total 1292

prev 52 / 130page next

Key sheet

You cannot remove the key sheet from products with the key sheet attached as a standard other than the PU operation type. When using the parameter unit FR-PU... More Details >>
- No：21596
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Input terminal function selection of multi-function series

You can use the input terminals X1 to X3 for an input terminal function such as 7-speed operation (high, middle, and low speed), output stop during motor ope... More Details >>
- No：21601
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
General-purpose magnetic flux control

Almost same control method. This control also performs vector calculation and divides the inverter's output current into an excitation current and into a tor... More Details >>
- No：21620
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
Comparison with FR-A200E

In addition to speed control, you can also select torque control as well as you can perform position control using an option. The speed control range is as l... More Details >>
- No：21655
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
400 Hz output setting

Change Pr.18 (High speed maximum frequency) to 400 Hz.If you are using the analog command to set the frequency, calibrate the 400 Hz frequency with Pr.903. More Details >>
- No：21931
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Fault output terminal load pattern

The fault output terminals A and C, and B and C of the power regeneration converter FR-RC are not capable of a micro load of 5 VDC±5%, 10 mA. The minimum loa... More Details >>
- No：21966
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Current input switching operation

With your setting, since Pr.60 assigns the OH function to the terminal PL, and terminals RL and SD are open, an external protection error occurs. (It does no... More Details >>
- No：21975
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-S500
When motor current is large

If the parameters related to the output voltage are not changed from the initial setting, it is unlikely that the output current at 55 Hz and 60 Hz is double... More Details >>
- No：21983
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-S500
Reset selection

The specifications of the FR-V200E series do not allow for choosing from "Reset input always enabled" and "Reset input enabled only when the protective funct... More Details >>
- No：22031
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-V200
Inverter outline dimension CAD data

The outline dimension diagram is found on the member's page of Mitsubishi Electric FA Global Website.Contact our sales personnel for details on the programma... More Details >>
- No：22053
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500

511-520 of Total 1292

Inquiries

page top