It is general type button battery (CR1216 × 1).

Yes, the current response is also improved at the same rate.

No, the MT-BU5 is not available Use the FR-BU2 instead.

The number of terminals: There are the same input terminals as F700P and the following terminals (4 points) are added. S

The setting is enabled at the Y24 start-up. The frequency cannot be changed when Y24 is always ON. Turn ON Y24 when writ

No, you cannot have both. The Japanese version of Configurator2 must be uninstalled before installing the English versio

When the winding ratio is large, the control according to the winding diameter is required. The upper controller has mea

Yes. Parameters can be read except during an inverter reset or when the password function is set.

DC application method (Pr.162 = 0 or 10): 4 Hz or lower is regarded as 0 Hz. AC application method (Pr.162 = 3 or 13): I

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

521-530 of Total 1306

prev 53 / 131page next

FR-LU08

It is general type button battery (CR1216 × 1). More Details >>
- No：21088
- Release Date：2018/08/22 16:25
- Category： Options
FR-A800

Yes, the current response is also improved at the same rate. More Details >>
- No：21079
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
MT-BU5

No, the MT-BU5 is not available Use the FR-BU2 instead. More Details >>
- No：21076
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options , FREQROL-A800 , FREQROL-F800
The number of input terminals

The number of terminals: There are the same input terminals as F700P and the following terminals (4 points) are added. Safety: SI1, SI2, SIC 24 V power suppl... More Details >>
- No：21070
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-F800
PLC function

The setting is enabled at the Y24 start-up. The frequency cannot be changed when Y24 is always ON. Turn ON Y24 when writing a frequency. More Details >>
- No：21048
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800
FR Configurator2

No, you cannot have both. The Japanese version of Configurator2 must be uninstalled before installing the English version. More Details >>
- No：20992
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR-A800-R2R

When the winding ratio is large, the control according to the winding diameter is required. The upper controller has measured the winding diameter and create... More Details >>
- No：20974
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
Parameter copy to the USB memory

Yes. Parameters can be read except during an inverter reset or when the password function is set. More Details >>
- No：20961
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
Frequency search

DC application method (Pr.162 = 0 or 10): 4 Hz or lower is regarded as 0 Hz. AC application method (Pr.162 = 3 or 13): It is not defined since it depends on ... More Details >>
- No：20905
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
Load characteristics fault detection

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor constant. For the V/F control, it is ... More Details >>
- No：20893
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800

521-530 of Total 1306

Inquiries

page top