Yes, it does, however, it does not acquire the certification of the BACnet association standard.

It is protected not by observing the temperature directly, but by estimating it from the current value, output frequency

It is possible when the dancer control and tension sensor feedback speed control is used and the PID calculation is turn

The encoder feedback is always required for the thickness calculation function. The actual line speed calculation functi

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor

It is based on the motor rated torque.

The ST1 is a setting file and the TR1 is a waveform file.

No, they cannot be monitored when Pr.363 is other than "5". They are enabled only when Pr.363 = 5.

The calculation is performed by two modes. One method calculates the current winding diameter automatically by moving th

Yes, the current is limited under the PM sensorless control.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

581-590 of Total 1306

prev 59 / 131page next

FR-F800

Yes, it does, however, it does not acquire the certification of the BACnet association standard. More Details >>
- No：20863
- Release Date：2018/08/22 16:24
- Category： FREQROL-F800
FR-A701

It is protected not by observing the temperature directly, but by estimating it from the current value, output frequency, and carrier frequency. More Details >>
- No：20871
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A700
FR-A800-R2R

It is possible when the dancer control and tension sensor feedback speed control is used and the PID calculation is turned OFF. Because the PID compensation ... More Details >>
- No：20889
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-R2R

The encoder feedback is always required for the thickness calculation function. The actual line speed calculation function requires the input of the actual l... More Details >>
- No：20890
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Load characteristics fault detection

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor constant. For the V/F control, it is ... More Details >>
- No：20893
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800
Load characteristics fault detection

It is based on the motor rated torque. More Details >>
- No：20895
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800
Trace function

The ST1 is a setting file and the TR1 is a waveform file. More Details >>
- No：20896
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL
Monitoring function of the FR-A800-R2R

No, they cannot be monitored when Pr.363 is other than "5". They are enabled only when Pr.363 = 5. More Details >>
- No：20915
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800-R2R

The calculation is performed by two modes. One method calculates the current winding diameter automatically by moving the dancer roll from lower limit positi... More Details >>
- No：20924
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800
FR-F800

Yes, the current is limited under the PM sensorless control. More Details >>
- No：20936
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-F800

581-590 of Total 1306

Inquiries

page top