For the inverter with capacity of 160K or higher, the fuse is built in its DC part.

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.1

To supply power via R1 and S1, 60 VA or higher is necessary for 22K or lower and 80 VA or higher is necessary for 30K to

Set Pr.9 to the rated current at 50 Hz or a value 1.1 times as the rated current at 60 Hz.You can specify the motor type

Set Pr.146 (Built-in potentiometer switching) to "0".This allows for using the potentiometer built in the FR-PA02 to set

The parameter setting software we provide is the FR Configurator (FR-SW3-SETUP-WJ). You must purchase it to use. Once yo

This can occur if the parameter unit window display is set to "Frequency setting value". If the screen display selection

The harmonics generation device manufacturer application form must be created by the manufacturer and submitted by the c

1. As the measurement condition is unknown, the possible cases are as follows: - If you measured the current on the inp

The reactor built in the FREQROL-A201 series is intended to stabilize operation of the converter circuit and differs fro

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

741-750 of Total 1292

prev 75 / 130page next

Inverter built-in fuse

For the inverter with capacity of 160K or higher, the fuse is built in its DC part. More Details >>
- No：20940
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
Frequency does not rise with blower

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.14 = 1) is used, the current may incre... More Details >>
- No：22060
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-F500
Inverter control power supply

To supply power via R1 and S1, 60 VA or higher is necessary for 22K or lower and 80 VA or higher is necessary for 30K to 55K.Note that the rush current of ap... More Details >>
- No：22043
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Electronic thermal O/L relay setting

Set Pr.9 to the rated current at 50 Hz or a value 1.1 times as the rated current at 60 Hz.You can specify the motor type with Pr.71 (Applied motor). For a co... More Details >>
- No：21941
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Operation panel (FR-PA02)

Set Pr.146 (Built-in potentiometer switching) to "0".This allows for using the potentiometer built in the FR-PA02 to set the frequency.(Set this parameter to... More Details >>
- No：21730
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Parameter setting software

The parameter setting software we provide is the FR Configurator (FR-SW3-SETUP-WJ). You must purchase it to use. Once you purchase the software, you can upgr... More Details >>
- No：21673
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Frequency monitor display fault

This can occur if the parameter unit window display is set to "Frequency setting value". If the screen display selection (first monitored window) is set to "... More Details >>
- No：21526
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A200
Harmonic Suppression Guidelines

The harmonics generation device manufacturer application form must be created by the manufacturer and submitted by the consumer when a device that contains a... More Details >>
- No：21507
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL
Inverter current value

1. As the measurement condition is unknown, the possible cases are as follows: - If you measured the current on the input side of the inverter, since the cu... More Details >>
- No：21457
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Built-in reactor

The reactor built in the FREQROL-A201 series is intended to stabilize operation of the converter circuit and differs from the FR-BAL. Note that when performi... More Details >>
- No：21421
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options , Others

741-750 of Total 1292

Inquiries

page top