By choosing the General-purpose magnetic flux vector control and slip compensation function, you can output torque of 15

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in

As the inverter, you can basically use the equation below to calculate the acceleration/deceleration time.Note that you

The low-voltage manual contactor is intended to prevent electric shock during inspection and maintenance of the drive un

Check the setting value of Pr.37 (Speed display). When the machine speed is set, Pr.811 is disabled. Change the setting

When Advanced magnetic flux vector control (Pr.80, 81) is used, the machine speed constant is controlled. The inverter c

The output signal across FM and SD is pulse output. The output frequency and number of pulses of the output signal acros

You can switch between PU operation and external operation using the plug-in option "12-bit digital input" card and exte

Basically, there is no difference between the A200 and A500. For safer use, from the A500, it is recommended to complete

You can change it by changing the setting of Pr.72 (PWM frequency selection). Setting range of Pr.72: 0, 1, 2, 3, 4, 5,

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

781-790 of Total 1306

prev 79 / 131page next

How much low-speed torque can be output?

By choosing the General-purpose magnetic flux vector control and slip compensation function, you can output torque of 150% or more at 1 Hz (200% or more at 3... More Details >>
- No：21618
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
12-bit digital input

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in 0.01 Hz units.For BCD input, when the... More Details >>
- No：21945
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Plug-in Options , FREQROL-A500
Calculation of acceleration/deceleration time

As the inverter, you can basically use the equation below to calculate the acceleration/deceleration time.Note that you should consider a factor of 120% for ... More Details >>
- No：21965
- Release Date：2018/08/22 16:30
- Category： Magnet motor drive
Manual contactor on output side of drive unit

The low-voltage manual contactor is intended to prevent electric shock during inspection and maintenance of the drive unit.The MELIPM series motor is a synch... More Details >>
- No：21996
- Release Date：2018/08/22 16:30
- Category： Magnet motor drive
Setting resolution switching

Check the setting value of Pr.37 (Speed display). When the machine speed is set, Pr.811 is disabled. Change the setting to the rotation speed. More Details >>
- No：21161
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700
Frequency display

When Advanced magnetic flux vector control (Pr.80, 81) is used, the machine speed constant is controlled. The inverter calculates the motor slip and compensa... More Details >>
- No：21374
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Output specification between FM and SD

The output signal across FM and SD is pulse output. The output frequency and number of pulses of the output signal across FM and SD are proportional. However... More Details >>
- No：21384
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
12-bit digital input and others

You can switch between PU operation and external operation using the plug-in option "12-bit digital input" card and external contact signals. After setting P... More Details >>
- No：21432
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-A200
Installing magnetic contactor on input side of inverter

Basically, there is no difference between the A200 and A500. For safer use, from the A500, it is recommended to completely shut off the power supply by turni... More Details >>
- No：21466
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Can I change the carrier frequency?

You can change it by changing the setting of Pr.72 (PWM frequency selection). Setting range of Pr.72: 0, 1, 2, 3, 4, 5, 6 (Initial setting is "6".) (The smal... More Details >>
- No：21640
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200

781-790 of Total 1306

Inquiries

page top