The pulses output from the inverter terminal FM are not completely synchronized with the inverter output frequency. The

If you connect two frequency setting potentiometers to the terminals 5 and 10, the permissible current of 10 mA is excee

In general, 1. The user cannot check the part for decision. 2. The user cannot replace the part as well. However, the us

1. The inverter also monitors the output current during DC injection brake operation in addition to normal operation. Th

I cannot answer clearly because the load is unknown. The operation cycle of operating for 10 seconds and stopping for 10

1. You can set the minimum time by setting the acceleration/deceleration time and acceleration/deceleration reference fr

You can connect multiple inverters to a single reactor. In this case, the load seems to be light from the reactor unless

1. Wiring length between the inverter and the motor should be 500 m or less. For 0.75 kW or lower motors, the followi

The power cannot be supplied to the control power supply separately for the FR-A024/A044 and small type FR-E500. Therefo

The carrier frequency for the FR-B3 is 2 kHz. For the low noise type FR-B3-N, it is 14.5 kHz.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

791-800 of Total 1292

prev 80 / 130page next

Accuracy of inverter terminal FM

The pulses output from the inverter terminal FM are not completely synchronized with the inverter output frequency. The pulse circuit from the terminal FM an... More Details >>
- No：21516
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL
Auxiliary input power supply

If you connect two frequency setting potentiometers to the terminals 5 and 10, the permissible current of 10 mA is exceeded, and you need to install 2 KΩ res... More Details >>
- No：21494
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Replacement of parts

In general, 1. The user cannot check the part for decision. 2. The user cannot replace the part as well. However, the user can replace the cooling fan if he ... More Details >>
- No：21482
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A100
Details of zero current detection

1. The inverter also monitors the output current during DC injection brake operation in addition to normal operation. Therefore, zero current detection also ... More Details >>
- No：21481
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A024
Operation frequency

I cannot answer clearly because the load is unknown. The operation cycle of operating for 10 seconds and stopping for 10 seconds is OK, but it is questionabl... More Details >>
- No：21474
- Release Date：2018/08/22 16:27
- Category： FREQROL-E500
Durability in multi-speed setting

1. You can set the minimum time by setting the acceleration/deceleration time and acceleration/deceleration reference frequency. 2. No problem with the termi... More Details >>
- No：21437
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Installing reactor for suppressing harmonics

You can connect multiple inverters to a single reactor. In this case, the load seems to be light from the reactor unless all of the inverters are rotating an... More Details >>
- No：21410
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Wire length between inverter and motor

1. Wiring length between the inverter and the motor should be 500 m or less. For 0.75 kW or lower motors, the following relationship is true: Capacity... More Details >>
- No：21392
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Countermeasure against the instantaneous power failure with the inverter

The power cannot be supplied to the control power supply separately for the FR-A024/A044 and small type FR-E500. Therefore, the UPS is not available. More Details >>
- No：21368
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A024 , FREQROL-E500
FR-B3

The carrier frequency for the FR-B3 is 2 kHz. For the low noise type FR-B3-N, it is 14.5 kHz. More Details >>
- No：21181
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Options

791-800 of Total 1292

Inquiries

page top