Check if the communication setting parameters (Pr.117 to Pr.124) are set to the same values between the inverter and per

- Both 200 V and 400 V can be used only with the capacity 22 kW or higher. - The rated current (capacity) is derated. (F

Two digits after the decimal point are rounded off. 28.139 Hz is rounded down to 28.13 Hz.

The communication via the MELSECNET is not available.

20 ms or less is required to switch the control with the MC signal.

No, they do not. Pr.72 is invalid at the offline auto tuning. It is also invalid when the motor rotates with Pr.96 = 101

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (progr

It is not possible because the RS-485 terminal block is not installed. Use the FR-A800 (RS-485 communication type) when

The RJ-45 compatible connector (LAN cable), switching hub, and others are required The auto detection of the connection

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

831-840 of Total 1306

prev 84 / 131page next

Inverter communication

Check if the communication setting parameters (Pr.117 to Pr.124) are set to the same values between the inverter and personal computer.Note that communicatio... More Details >>
- No：22105
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-A500
FR-XC

- Both 200 V and 400 V can be used only with the capacity 22 kW or higher. - The rated current (capacity) is derated. (For the detail, refer to the Instructi... More Details >>
- No：20802
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Options
Insulation level of the MM-EFS

F class (155 deg C) More Details >>
- No：20809
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Others
FR-A8NC

Two digits after the decimal point are rounded off. 28.139 Hz is rounded down to 28.13 Hz. More Details >>
- No：20812
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Plug-in Options
Seamless communication of FR Configurator SW3

The communication via the MELSECNET is not available. More Details >>
- No：20830
- Release Date：2018/08/22 16:24
- Category： Engineering Software
Switching time of the FR-A800 control

20 ms or less is required to switch the control with the MC signal. More Details >>
- No：20838
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-A800

No, they do not. Pr.72 is invalid at the offline auto tuning. It is also invalid when the motor rotates with Pr.96 = 101. More Details >>
- No：20878
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
FR-A800-E

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (programmable controller) are available. On... More Details >>
- No：20879
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
FR-A800-E

It is not possible because the RS-485 terminal block is not installed. Use the FR-A800 (RS-485 communication type) when performing the RS-485 communication. More Details >>
- No：20881
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
FR-A800-E

The RJ-45 compatible connector (LAN cable), switching hub, and others are required The auto detection of the connection devices, externally monitoring the in... More Details >>
- No：20882
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800

831-840 of Total 1306

Inquiries

page top