Set it to "13" (Constant-torque).

Turn ON the monitor command RYC.

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communica

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since i

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L

No, it cannot be normally closed contact. When the electronic bypass function is used, the setting of Pr.17 is disabled.

The following causes are probable for persistent Err. display: 1. The terminals RES and SD are always short-circuited. 2

You can perform forward and reverse operations with the RUN key on the operation panel by setting Pr.40 (RUN key rotatio

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended settin

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

851-860 of Total 1292

prev 86 / 130page next

Auto tuning

Set it to "13" (Constant-torque).　　 More Details >>
- No：21752
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700
CC-Link

Turn ON the monitor command RYC. More Details >>
- No：21826
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
CC-Link

1. You can reset the inverter from an external terminal.You can do it without regard to the setting of Pr.338 (Communication operation command source) and Pr... More Details >>
- No：21837
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Power supply phase loss

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since it loses the control power supply.2. W... More Details >>
- No：22010
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Use of the FR-RC

Yes. More Details >>
- No：21062
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , Options
FR-A800

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L). For the details, refer to the repl... More Details >>
- No：21108
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-A500
Electronic bypass function

No, it cannot be normally closed contact. When the electronic bypass function is used, the setting of Pr.17 is disabled. More Details >>
- No：21193
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Dealing with Err.

The following causes are probable for persistent Err. display: 1. The terminals RES and SD are always short-circuited. 2. Operation panel contact or operatio... More Details >>
- No：21412
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Parameter setting

You can perform forward and reverse operations with the RUN key on the operation panel by setting Pr.40 (RUN key rotation direction selection). More Details >>
- No：21719
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
CC-Link

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended setting).Write the extended setting of the ... More Details >>
- No：21834
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P

851-860 of Total 1292

Inquiries

page top