1. How much is the sensitivity current? When the sum of the three-phase output current of the inverter reaches approxima

For the FR-E700, only the terminal FM allows for variable output and the output is a pulse signal. Therefore, it cannot

Slow blinking of the RUN LED indicates reverse operation.Fast blinking indicates that while the start command is input,

If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the fre

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in

Pr.133 can be written.Since the data code numbers of parameters are duplicate, target parameters are switched by link pa

It does not change even when General-purpose magnetic flux vector control is performed. Pr.3 is the inflection point of

The sine wave filter can be applied only under V/F control. When Pr.72 PWM frequency selection is set to 25, V/F control

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode

The mini B connector is used for connecting with FR Configurator2. A USB memory device can be connected to the A connect

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Inverters-FREQROL

FAQ within [ Inverters-FREQROL ]

931-940 of Total 1292

prev 94 / 130page next

Output side earth (ground) fault overcurrent protection

1. How much is the sensitivity current? When the sum of the three-phase output current of the inverter reaches approximately 70% of the inverter rated curren... More Details >>
- No：21394
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-A024 , FREQROL-E500
Output frequency

For the FR-E700, only the terminal FM allows for variable output and the output is a pulse signal. Therefore, it cannot be directly input to the programmable... More Details >>
- No：21682
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
CC-Link

Slow blinking of the RUN LED indicates reverse operation.Fast blinking indicates that while the start command is input, the running frequency command is not ... More Details >>
- No：21833
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
CC-Link

If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the frequency, you need to input them extern... More Details >>
- No：21900
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
12-bit digital input

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in 0.01 Hz units.For BCD input, when the... More Details >>
- No：21945
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Plug-in Options , FREQROL-A500
Parameter writing via CC-Link

Pr.133 can be written.Since the data code numbers of parameters are duplicate, target parameters are switched by link parameter extended setting.You can acce... More Details >>
- No：21976
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Plug-in Options , FREQROL-A500 , FREQROL-F500
S-shape acceleration/deceleration of the FR-D700

It does not change even when General-purpose magnetic flux vector control is performed. Pr.3 is the inflection point of the S-shape. More Details >>
- No：20834
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-D700
Sine wave filter

The sine wave filter can be applied only under V/F control. When Pr.72 PWM frequency selection is set to 25, V/F control is set automatically. The applicable... More Details >>
- No：21068
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options , FREQROL-A800 , FREQROL-A700
Operation panel

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode is enabled and the "MON" LED blinks s... More Details >>
- No：21075
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
USB

The mini B connector is used for connecting with FR Configurator2. A USB memory device can be connected to the A connector (host) to save parameters or trace... More Details >>
- No：21095
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-F800

931-940 of Total 1292

Inquiries

page top