It is one of other communication errors. The communication is not established. Check the communication settings.

It is considered that communication settings between the inverter and personal computer do not match. Check if settings

Windows 3.1 or Windows 95. The personal computer platform can be PC98 or DOS/V as far as Windows 3.1 or later runs.

The FREQROL-F500 series has been already supported by the setup software released since February 2000.

From before, the QCPU has been used and each setting does not make a difference internally. Thus, the selection was redu

The error may occur if the old version of GX-WORKS3 is used. Update GX-WORKS3 to the latest version.

It is compatible with the -R type FR-S500. (It is not compatible with the FR-S500 without -R because it does not have th

Set the parameters below. For other parameters, keep the initial settings.1. Set Pr.122 (Communication check time interv

Vector control cannot be selected unless Pr.862 is set to 1. Only the first motor is supported in the motor setting of F

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Engineering Software

FAQ within [ Engineering Software ]

11-20 of Total 43

prev 2 / 5page next

FR-SW1-SETUP

It is one of other communication errors. The communication is not established. Check the communication settings. More Details >>
- No：21176
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Engineering Software
Inverter data cannot be read

It is considered that communication settings between the inverter and personal computer do not match. Check if settings such as communication rate and stop b... More Details >>
- No：21431
- Release Date：2018/08/22 16:27
- Category： Engineering Software
Which OS is supported?

Windows 3.1 or Windows 95. The personal computer platform can be PC98 or DOS/V as far as Windows 3.1 or later runs. More Details >>
- No：21590
- Release Date：2018/08/22 16:28
- Category： Engineering Software
Can I set the FR-F series parameters?

The FREQROL-F500 series has been already supported by the setup software released since February 2000. More Details >>
- No：22068
- Release Date：2018/08/22 16:30
- Category： Engineering Software
FR-SW3 CC-Link Seamless

From before, the QCPU has been used and each setting does not make a difference internally. Thus, the selection was reduced to the QCPU only. It can also be ... More Details >>
- No：20868
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2 (trial version)

The error may occur if the old version of GX-WORKS3 is used. Update GX-WORKS3 to the latest version. More Details >>
- No：20971
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

Yes. More Details >>
- No：21008
- Release Date：2018/08/22 16:25
- Category： Engineering Software
FR-SW1-SETUP

It is compatible with the -R type FR-S500. (It is not compatible with the FR-S500 without -R because it does not have the PU connector and thus cannot be con... More Details >>
- No：21175
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Engineering Software
Inverter setup

Set the parameters below. For other parameters, keep the initial settings.1.　Set Pr.122 (Communication check time interval) to other than "0". ("9999" is OK.... More Details >>
- No：21986
- Release Date：2018/08/22 16:30
- Category： Engineering Software
FR Configurator2

Vector control cannot be selected unless Pr.862 is set to 1. Only the first motor is supported in the motor setting of FR Configurator2. More Details >>
- No：20847
- Release Date：2018/08/22 16:24
- Category： Engineering Software

11-20 of Total 43

Inquiries

page top