FAQ


FAQAbout Products
- FAQ > Drive Products > Inverters-FREQROL > Engineering Software
FAQ
Keyword Search
Engineering Software
FAQ within [ Engineering Software ]
-
It is one of other communication errors. The communication is not established. Check the communication settings. More Details >>
- No:21176
- Release Date:2018/08/22 16:26
- Category: Inverters-FREQROL , Engineering Software
-
In addition to the FR-A200E series, you can use it with the following inverters: - FR-A024- FR-A200- FR-A100E- FR-A100- FR-V200- OthersAlso, supported by the... More Details >>
- No:21588
- Release Date:2018/08/22 16:28
- Category: Engineering Software
-
No, it cannot. Purchase IQ-Works2 or FR Configurator2. Upgrading to from IQ-Works to IQ-Works2 is for a fee. More Details >>
- No:20829
- Release Date:2018/08/22 16:24
- Category: Engineering Software
-
Yes. More Details >>
- No:21008
- Release Date:2018/08/22 16:25
- Category: Engineering Software
-
Set the parameters below. For other parameters, keep the initial settings.1. Set Pr.122 (Communication check time interval) to other than "0". ("9999" is OK.... More Details >>
- No:21986
- Release Date:2018/08/22 16:30
- Category: Engineering Software
-
It is compatible with the -R type FR-S500. (It is not compatible with the FR-S500 without -R because it does not have the PU connector and thus cannot be con... More Details >>
- No:21175
- Release Date:2018/08/22 16:26
- Category: Inverters-FREQROL , Engineering Software
-
From before, the QCPU has been used and each setting does not make a difference internally. Thus, the selection was reduced to the QCPU only. It can also be ... More Details >>
- No:20868
- Release Date:2018/08/22 16:24
- Category: Inverters-FREQROL , Engineering Software
-
Output current: Because the filter, effective value of the output current displayed on the operation panel, is included, the momentary fluctuation is difficu... More Details >>
- No:20919
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL , Engineering Software
-
This error depends on the application and the cause is unknown. (The runtime error '31037' is not returned from this application but from the OS (Windows).) ... More Details >>
- No:21495
- Release Date:2018/08/22 16:27
- Category: Engineering Software
-
The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No:20913
- Release Date:2018/08/22 16:25
- Category: Inverters-FREQROL , Engineering Software
31-40 of Total 41