It is compatible with the -R type FR-S500. (It is not compatible with the FR-S500 without -R because it does not have th

Windows 3.1 or Windows 95. The personal computer platform can be PC98 or DOS/V as far as Windows 3.1 or later runs.

Vector control cannot be selected unless Pr.862 is set to 1. Only the first motor is supported in the motor setting of F

From before, the QCPU has been used and each setting does not make a difference internally. Thus, the selection was redu

Vector control cannot be selected unless Pr.862 is set to 1. (Only the first motor is supported in the motor setting of

SW1 is not supported because there is no product However, SW2 can be upgraded by entering the product ID.

Yes, the English version of SW3 is included.

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ve

Only the parameter setting values (USB memory parameter copy file: CP1 file) read from the inverter to USB memory can be

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > Engineering Software

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Engineering Software

FAQ within [ Engineering Software ]

1-10 of Total 43

prev 1 / 5page next

FR-SW1-SETUP

It is compatible with the -R type FR-S500. (It is not compatible with the FR-S500 without -R because it does not have the PU connector and thus cannot be con... More Details >>
- No：21175
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Engineering Software
Which OS is supported?

Windows 3.1 or Windows 95. The personal computer platform can be PC98 or DOS/V as far as Windows 3.1 or later runs. More Details >>
- No：21590
- Release Date：2018/08/22 16:28
- Category： Engineering Software
FR Configurator2

Vector control cannot be selected unless Pr.862 is set to 1. Only the first motor is supported in the motor setting of FR Configurator2. More Details >>
- No：20847
- Release Date：2018/08/22 16:24
- Category： Engineering Software
FR-SW3 CC-Link Seamless

From before, the QCPU has been used and each setting does not make a difference internally. Thus, the selection was reduced to the QCPU only. It can also be ... More Details >>
- No：20868
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

Vector control cannot be selected unless Pr.862 is set to 1. (Only the first motor is supported in the motor setting of FR Configurator2.) More Details >>
- No：20908
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

Yes. More Details >>
- No：21008
- Release Date：2018/08/22 16:25
- Category： Engineering Software
SW1DND-FRC2 (FR Configurator2)

SW1 is not supported because there is no product However, SW2 can be upgraded by entering the product ID. More Details >>
- No：21067
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

Yes, the English version of SW3 is included. More Details >>
- No：20912
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No：20913
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR Configurator2

Only the parameter setting values (USB memory parameter copy file: CP1 file) read from the inverter to USB memory can be edited. Customers cannot generate a ... More Details >>
- No：21007
- Release Date：2018/08/22 16:25
- Category： Engineering Software

1-10 of Total 43

Inquiries

page top