A DC reactor connection is required under the following conditions. - Inverter capacity is 75K or higher - Motor capacit

No. Turn OFF and ON both main circuit and control circuit.

- The installation size is compatible for the following capacities. Compatible: 200 V class 90K or lower, 400 V class 7.

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized

The FR-PU07(BB) can be used with some restrictions.* The major restrictions are as follows. - Pr.1000 or later cannot be

By performing offline auto tuning, other manufacturers' IPM, SPM motors can be used under PM sensorless vector control.

DC voltage is applied when Pr.162 = 0, and AC voltage is applied when Pr.162 = 3 or 13. For the AC, the operation is eas

No. Check the parameter setting of the A700, and then adjust the parameter setting of the A800 to those of the A700. For

It cannot be connected. When using DU08, connect it to the PU connector.

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the o

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A800

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A800 ]

21-30 of Total 142

prev 3 / 15page next

Installation necessity of a DC reactor

A DC reactor connection is required under the following conditions. - Inverter capacity is 75K or higher - Motor capacity is 75 kW or higher. If any of the a... More Details >>
- No：21077
- Release Date：2018/08/22 16:25
Life measurement of the main circuit capacitor

No. Turn OFF and ON both main circuit and control circuit. More Details >>
- No：20999
- Release Date：2018/08/22 16:25
FR-A800

- The installation size is compatible for the following capacities. Compatible: 200 V class 90K or lower, 400 V class 7.5K or lower and 18.5K to 280K- The in... More Details >>
- No：21110
- Release Date：2018/08/22 16:25
Safety stop function

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized because of the voltage drop. More Details >>
- No：21053
- Release Date：2018/08/22 16:25
Parameter unit

The FR-PU07(BB) can be used with some restrictions.* The major restrictions are as follows. - Pr.1000 or later cannot be set. - Alarms or warnings that are a... More Details >>
- No：21119
- Release Date：2018/08/22 16:26
FR-A800

By performing offline auto tuning, other manufacturers' IPM, SPM motors can be used under PM sensorless vector control. * When an other manufacturers' magnet... More Details >>
- No：21106
- Release Date：2018/08/22 16:25
Frequency search of the FR-A800/FR-F800

DC voltage is applied when Pr.162 = 0, and AC voltage is applied when Pr.162 = 3 or 13. For the AC, the operation is easier to continue than the DC and the i... More Details >>
- No：20831
- Release Date：2018/08/22 16:24
FR-A800

No. Check the parameter setting of the A700, and then adjust the parameter setting of the A800 to those of the A700. For the details, refer to the replacemen... More Details >>
- No：21107
- Release Date：2018/08/22 16:25
FR-DU08

It cannot be connected. When using DU08, connect it to the PU connector. More Details >>
- No：21111
- Release Date：2018/08/22 16:25
24 VDC power supply

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the operation panel or an USB memory devic... More Details >>
- No：21097
- Release Date：2018/08/22 16:25

21-30 of Total 142

Inquiries

page top