Up to 64 (slave stations). The number of connectable units differs depending on the master station.

The mini B connector is used for connecting with FR Configurator2. A USB memory device can be connected to the A connect

Do not remove the jumper of the R1 and S1 when inputting the control circuit power supply from the external 24 V power s

No. To set the PLC function, FR Configurator2 is required. (However, the setting cannot be configured with the trial ver

No. Check the parameter setting of the A700, and then adjust the parameter setting of the A800 to those of the A700. For

The rotation speed has almost no effect. The residual voltage increases when the torque boost is increased, but no adjus

DC voltage is applied when Pr.162 = 0, and AC voltage is applied when Pr.162 = 3 or 13. For the AC, the operation is eas

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are buil

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A800

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A800 ]

41-50 of Total 144

prev 5 / 15page next

CC-Link IE Field Basic

Up to 64 (slave stations). The number of connectable units differs depending on the master station. More Details >>
- No：20857
- Release Date：2018/08/22 16:24
USB

The mini B connector is used for connecting with FR Configurator2. A USB memory device can be connected to the A connector (host) to save parameters or trace... More Details >>
- No：21095
- Release Date：2018/08/22 16:25
24 VDC power supply

Do not remove the jumper of the R1 and S1 when inputting the control circuit power supply from the external 24 V power supply (connecting across the terminal... More Details >>
- No：21074
- Release Date：2018/08/22 16:25
FR-A800 and FR-ALF

Yes, it can. More Details >>
- No：20806
- Release Date：2018/08/22 16:24
PLC function

No. To set the PLC function, FR Configurator2 is required. (However, the setting cannot be configured with the trial version.) More Details >>
- No：21102
- Release Date：2018/08/22 16:25
FR-A800

No. Check the parameter setting of the A700, and then adjust the parameter setting of the A800 to those of the A700. For the details, refer to the replacemen... More Details >>
- No：21107
- Release Date：2018/08/22 16:25
Residual voltage at the output shutoff

The rotation speed has almost no effect. The residual voltage increases when the torque boost is increased, but no adjustment is required. More Details >>
- No：20906
- Release Date：2018/08/22 16:25
Frequency search of the FR-A800/FR-F800

DC voltage is applied when Pr.162 = 0, and AC voltage is applied when Pr.162 = 3 or 13. For the AC, the operation is easier to continue than the DC and the i... More Details >>
- No：20831
- Release Date：2018/08/22 16:24
Compliance with Electric/Machinery Facility Common Specifications of the Ministry of Land, Infrastructure, Transport and Tourism of Japan

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are built in (the common mode choke is provid... More Details >>
- No：21117
- Release Date：2018/08/22 16:26
Safety stop function

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized because of the voltage drop. More Details >>
- No：21053
- Release Date：2018/08/22 16:25

41-50 of Total 144

Inquiries

page top