LD is not supported, however, SLD is supported.

Since the lower limit has been internally set, 3% or less is recognized as 3%.

The length within 30 m is recommended. When the wiring length is long, signals may not be received accurately due to the

The rotation speed has almost no effect. The residual voltage increases when the torque boost is increased, but no adjus

The X114 signal is for switching the control to the dancer control or tension sensorless torque control. The signal inpu

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are buil

By turning ON the connector of the built-in filter, the inverter can be compliant with EMC Directive (EN 61800-3 2nd Env

The number of timer points is 16 for the high speed and low speed in total.

V/F control/Advanced magnetic flux vector control/Sensorless vector control: 0.3 rpm increments, Vector control with enc

Set 3 kg (intermediate value) for the load weight 1 to 5 kg.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A800

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A800 ]

71-80 of Total 142

prev 8 / 15page next

Model

LD is not supported, however, SLD is supported. More Details >>
- No：21054
- Release Date：2018/08/22 16:25
Gain adjustment under the speed control

Since the lower limit has been internally set, 3% or less is recognized as 3%. More Details >>
- No：21016
- Release Date：2018/08/22 16:25
Output signal

The length within 30 m is recommended. When the wiring length is long, signals may not be received accurately due to the increased inductance. More Details >>
- No：20995
- Release Date：2018/08/22 16:25
Residual voltage at the output shutoff

The rotation speed has almost no effect. The residual voltage increases when the torque boost is increased, but no adjustment is required. More Details >>
- No：20906
- Release Date：2018/08/22 16:25
FR-A800-R2R

The X114 signal is for switching the control to the dancer control or tension sensorless torque control. The signal input becomes invalid during operation be... More Details >>
- No：20845
- Release Date：2018/08/22 16:24
Compliance with Electric/Machinery Facility Common Specifications of the Ministry of Land, Infrastructure, Transport and Tourism of Japan

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are built in (the common mode choke is provid... More Details >>
- No：21117
- Release Date：2018/08/22 16:26
Europe EMC Directive compliance

By turning ON the connector of the built-in filter, the inverter can be compliant with EMC Directive (EN 61800-3 2nd Environment C3) alone. More Details >>
- No：21116
- Release Date：2018/08/22 16:26
PLC function

The number of timer points is 16 for the high speed and low speed in total. More Details >>
- No：21056
- Release Date：2018/08/22 16:25
Setting resolution

V/F control/Advanced magnetic flux vector control/Sensorless vector control: 0.3 rpm increments, Vector control with encoder: 0.1 rpm increments More Details >>
- No：20960
- Release Date：2018/08/22 16:25
Anti-sway control

Set 3 kg (intermediate value) for the load weight 1 to 5 kg. More Details >>
- No：20953
- Release Date：2018/08/22 16:25

71-80 of Total 142

Inquiries

page top