If the command is 0.01 Hz or higher, the positioning control is performed.

Turning ON the main circuit power stops the 24 V external power supply operation and enables the normal operation. There

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized

The number of timer points is 16 for the high speed and low speed in total.

SD1148 can turn ON multiple bits such as STF and RH simultaneously. SM turns ON bits individually. When SD1148 is H5, it

Ver1.1 (Ver2.0 (full speed) compatible). USB1.1 supports Full Speed (12 Mbps) and Low Speed (1.5 Mbps) transmission spee

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the o

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are buil

The deceleration stop is also performed according to the setting in Pr.815 under V/F control.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A800

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A800 ]

81-90 of Total 144

prev 9 / 15page next

MM-FR-A800

If the command is 0.01 Hz or higher, the positioning control is performed. More Details >>
- No：21001
- Release Date：2018/08/22 16:25
Common bus connection

Yes. More Details >>
- No：21009
- Release Date：2018/08/22 16:25
Control power supply

Turning ON the main circuit power stops the 24 V external power supply operation and enables the normal operation. Therefore, the separate power supply canno... More Details >>
- No：21018
- Release Date：2018/08/22 16:25
Safety stop function

Up to three inverters can be connected. When more than four inverters are connected, the inverters may not be recognized because of the voltage drop. More Details >>
- No：21053
- Release Date：2018/08/22 16:25
PLC function

The number of timer points is 16 for the high speed and low speed in total. More Details >>
- No：21056
- Release Date：2018/08/22 16:25
PLC function

SD1148 can turn ON multiple bits such as STF and RH simultaneously. SM turns ON bits individually. When SD1148 is H5, it is same as when SM1200 (STF) and SM1... More Details >>
- No：21057
- Release Date：2018/08/22 16:25
USB version

Ver1.1 (Ver2.0 (full speed) compatible). USB1.1 supports Full Speed (12 Mbps) and Low Speed (1.5 Mbps) transmission speed modes. USB2.0 supports High Speed (... More Details >>
- No：21096
- Release Date：2018/08/22 16:25
24 VDC power supply

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the operation panel or an USB memory devic... More Details >>
- No：21097
- Release Date：2018/08/22 16:25
Compliance with Electric/Machinery Facility Common Specifications of the Ministry of Land, Infrastructure, Transport and Tourism of Japan

They can be compliant by connecting an optional DC reactor (FR-HEL). (A capacitive filter and common mode choke are built in (the common mode choke is provid... More Details >>
- No：21117
- Release Date：2018/08/22 16:26
Emergency stop function

The deceleration stop is also performed according to the setting in Pr.815 under V/F control. More Details >>
- No：20957
- Release Date：2018/08/22 16:25

81-90 of Total 144

Inquiries

page top