The number of terminals: There are the same input terminals as F700P and the following terminals (4 points) are added. S

Do not remove the jumper of the R1 and S1 when inputting the control circuit power supply from the external 24 V power s

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode

The trace data is stored in the built-in RAM of the inverter and deleted when the power is turned OFF or the inverter is

Ver1.1 (Ver2.0 (full speed) compatible). USB1.1 supports Full Speed (12 Mbps) and Low Speed (1.5 Mbps) transmission spee

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the o

If using an inverter with capacity of 75K or higher, or motor with capacity of 75 kW or higher, always select and instal

Yes, it does, however, it does not acquire the certification of the BACnet association standard.

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (progr

The function operates immediately when the current of 85% or higher flows. The limit is canceled when the current become

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-F800

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-F800 ]

41-50 of Total 89

prev 5 / 9page next

The number of input terminals

The number of terminals: There are the same input terminals as F700P and the following terminals (4 points) are added. Safety: SI1, SI2, SIC 24 V power suppl... More Details >>
- No：21070
- Release Date：2018/08/22 16:25
24 VDC power supply

Do not remove the jumper of the R1 and S1 when inputting the control circuit power supply from the external 24 V power supply (connecting across the terminal... More Details >>
- No：21074
- Release Date：2018/08/22 16:25
Operation panel

If the operation panel has not been operated for the time set in Pr.1048 Display-off waiting time, the display-off mode is enabled and the "MON" LED blinks s... More Details >>
- No：21075
- Release Date：2018/08/22 16:25
Trace data

The trace data is stored in the built-in RAM of the inverter and deleted when the power is turned OFF or the inverter is reset. The data can be held with any... More Details >>
- No：21078
- Release Date：2018/08/22 16:25
USB version

Ver1.1 (Ver2.0 (full speed) compatible). USB1.1 supports Full Speed (12 Mbps) and Low Speed (1.5 Mbps) transmission speed modes. USB2.0 supports High Speed (... More Details >>
- No：21096
- Release Date：2018/08/22 16:25
24 VDC power supply

Power is supplied only to the control power supply, and thus this enables communication, parameter setting through the operation panel or an USB memory devic... More Details >>
- No：21097
- Release Date：2018/08/22 16:25
DC reactor

If using an inverter with capacity of 75K or higher, or motor with capacity of 75 kW or higher, always select and install the inverter based on the capacity ... More Details >>
- No：21112
- Release Date：2018/08/22 16:25
FR-F800

Yes, it does, however, it does not acquire the certification of the BACnet association standard. More Details >>
- No：20863
- Release Date：2018/08/22 16:24
FR-A800-E

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (programmable controller) are available. On... More Details >>
- No：20879
- Release Date：2018/08/22 16:24
Carrier frequency automatic reducing function

The function operates immediately when the current of 85% or higher flows. The limit is canceled when the current becomes 80% or lower. More Details >>
- No：20903
- Release Date：2018/08/22 16:25

41-50 of Total 89

Inquiries

page top