1. You can set the station number.However, you can only connect a single personal computer to a single inverter.2. You c

Yes.You can issue operation (forward/reverse), frequency setting, parameter read/write, and operation monitor commands.

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communicati

Set Pr.55 (Frequency monitoring reference) of the first inverter to 70 Hz.

Connect the brake resistor to the terminal P and terminal PR. (For the FR-A700-7.5K or lower, remove the jumper of the t

1. Set Pr.162 to "10" (Frequency search at every start).2. You can ignore the setting if the motor excitation current is

Increasing the value of Pr.0 (Torque boost) increases the output voltage, and the output current also increases.Note tha

Change the setting in the PU operation mode.

Yes. It is available by using the FR-A7AY (plug-in option). By setting Pr.307 (Setting for zero analog output) to "20" a

Set Pr.79 (Operation mode) to "3" and Pr.161 (Frequency setting/key lock operation selection) to "1".

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A700

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A700 ]

101-110 of Total 352

prev 11 / 36page next

FR-Configurator

1. You can set the station number.However, you can only connect a single personal computer to a single inverter.2. You can set communication by choosing Tool... More Details >>
- No：21882
- Release Date：2018/08/22 16:29
CC-Link

Yes.You can issue operation (forward/reverse), frequency setting, parameter read/write, and operation monitor commands. More Details >>
- No：21899
- Release Date：2018/08/22 16:29
CC-Link

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communication. More Details >>
- No：21901
- Release Date：2018/08/22 16:29
AM terminal output

Set Pr.55 (Frequency monitoring reference) of the first inverter to 70 Hz. More Details >>
- No：21257
- Release Date：2018/08/22 16:26
Brake resistor

Connect the brake resistor to the terminal P and terminal PR. (For the FR-A700-7.5K or lower, remove the jumper of the terminals PR and PX.) Do not remove th... More Details >>
- No：21333
- Release Date：2018/08/22 16:27
Coasting

1. Set Pr.162 to "10" (Frequency search at every start).2. You can ignore the setting if the motor excitation current is unknown. More Details >>
- No：21718
- Release Date：2018/08/22 16:29
Output current

Increasing the value of Pr.0 (Torque boost) increases the output voltage, and the output current also increases.Note that increasing this value too high puts... More Details >>
- No：21732
- Release Date：2018/08/22 16:29
CC-Link station number setting

Change the setting in the PU operation mode.　　 More Details >>
- No：21747
- Release Date：2018/08/22 16:29
4 to 20 mA output

Yes. It is available by using the FR-A7AY (plug-in option). By setting Pr.307 (Setting for zero analog output) to "20" and Pr.309 (Analog output signal volta... More Details >>
- No：21246
- Release Date：2018/08/22 16:26
Operation method

Set Pr.79 (Operation mode) to "3" and Pr.161 (Frequency setting/key lock operation selection) to "1". More Details >>
- No：21249
- Release Date：2018/08/22 16:26

101-110 of Total 352

Inquiries

page top